FES330KQ0 Roper Range - Overview

Diagrams for FES330KQ0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Oven Sensor – Part Number: WPW10181986
$112.60
In Stock
Oven Sensor
★★★★★
★★★★★
(52)
Part #WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Drip Bowl - 6 Inch – Part Number: W10196406RW
$23.29
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(9)
Part #W10196406RW
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
Oven Bake Element – Part Number: WPW10308477
$74.64
In Stock
Oven Bake Element
★★★★★
★★★★★
(40)
Part #WPW10308477
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.
Range Receptacle Kit – Part Number: 814399
$48.35
In Stock
Range Receptacle Kit
★★★★★
★★★★★
(13)
Part #814399
This surface burner receptacle assembly comes with the receptacle, two wires, two wire nuts, and two pieces of heat-shrink tubing.
Drip Bowl - 8 Inch – Part Number: W10196405RW
$25.41
In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(2)
Part #W10196405RW
This part is located beneath the element and catches any spills.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Insulation – Part Number: WPW10208653
$69.24
In Stock
Range Insulation
★★★★★
★★★★★
(9)
Part #WPW10208653
Oven Wrap Insulation.
Infinite Control Switch, 6" – Part Number: WP3149404
$63.75
In Stock
Infinite Control Switch, 6"
★★★★★
★★★★★
(11)
Part #WP3149404
If your stove burner won’t heat up, stays on high, or won’t adjust, this switch might be the fix. It controls the heat for 6-inch electric burners and fits many Whirlpool, Maytag, and KitchenAid ranges. Easy to install—just be sure to unplug the appliance or flip the breaker first. Sold individually.
Range Rear Drawer Glide – Part Number: WP8053334
$15.43
In Stock
Range Rear Drawer Glide
★★★★★
★★★★★
(3)
Part #WP8053334
Sold Individually. As the broiler drawer slides back and forth, these glides prevent metal-to-metal contact.
Infinite Switch - 8 Inch – Part Number: WP3148953
$72.74
In Stock
Infinite Switch - 8 Inch
★★★★★
★★★★★
(17)
Part #WP3148953
This switch helps you control the heat on your stove’s 8-inch burner. If your burner isn’t heating up or won’t adjust properly, this part could be the fix. It works by sending the right amount of power to the burner when you turn the knob. It’s made to fit many models and is easy to install—just unplug your stove first and wear gloves for safety.
Rack – Part Number: W11520287
$68.64
In Stock
Rack
★★★★★
★★★★★
(12)
Part #W11520287
This oven rack offers a sturdy, chrome-finished surface for baking, roasting, and broiling in your range. It fits a wide selection of compatible ovens and is built to handle high heat and frequent use. If your current rack is bent, rusted, or missing, this replacement restores safe and reliable cooking support. Be sure to check your oven model for compatibility. Sold separately.

Manuals & Care Guides for FES330KQ0

Click to download

Common Symptoms of the FES330KQ0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowls were rusty and rotting through
491 of 504 people found this instruction helpful.
  • Michael from Kings Park, NY
  • Really Easy
  • Less than 15 mins
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!
Was this helpful?
Thank you for voting!
Just Replaced Ole Drip Bowls.
379 of 395 people found this instruction helpful.
  • Roger from Osage Beach, MO
  • Really Easy
  • Less than 15 mins
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique compan y!!!!
Was this helpful?
Thank you for voting!
heating element burnt up
108 of 124 people found this instruction helpful.
  • Esther from San Antonio, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the sc rews because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
Was this helpful?
Thank you for voting!