Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Seth
February 23, 2024
Does the concaved opening go towards the heatinf element or does the flat end go towards the heating element?
For model number FER641FS0
Hello Seth, thank you for contacting us. Based on our research, the heating element goes in the concave side of the baffle. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 30, 2017
How do you replace the baffle? The dryer makes noise when it starts and when it stops. A thumping noise occurs. I replaced the drum bearing with kit, it still does it. You can turn the drum by hand and you can hear it. Any help would be welcome. Thank you.
For model number gler331as2
Hello Bob,
Thanks for your question. This issue is likely arising from the lower felt seal (part number PS832645) and the upper felt seal (PS832644) rather than the baffle heater.
I hope this helps.
I replaced every part except motor and blower assy. Still makes a noise when it starts and stops what can it be?
For model number gler331as2
Hello Bob, Thank you for your inquiry. You can test the drive motor with a multimeter to see if it has continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
Was this helpful?
Thank you for voting!
Shane
June 18, 2024
When i try to start the diet the drum shakes, the rear moves to the side and it binds up until the motor shuts off. Is this the part I most likely need?
For model number FLSE60RGS1
Hello Shane, thank you for contacting us. Yes, based on our understanding of the issue, we would suggest replacing the heater baffle part number PS446417, to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noise...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
