Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Push-To-Start Switch 131469000
Fits your DCCH43GA6WW!
$48.14
In Stock
Fits your DCCH43GA6WW!
PartSelect Number
PS417898
Manufacturer Part Number
131469000
Manufactured by
Frigidaire
Product Description
Push-To-Start Switch Specifications
This part is used to start the dryer once you have selected a setting with the timer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Frigidaire, Westinghouse, Gibson, Crosley.
Part# 131469000 replaces these:
AP2106967, 407469
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
switch burnt out
first you had to take back top panel off remove wires from switch turn old switch to the right pull it out then connect wires to new switch put switch back in screw back panel back on very easy 10 minutes tops thank you
Other Parts Used:
-
paul from west keansburg, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
22 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would make a sound when the button was pushed but no response from the unit
I read your suggested test to determine where the problem was that was making the machine not start.
Got part . Took off back control panel. I put the part on as your instructions guided me . SUCCESS!
I set the timer and pushed the button and the dryer began turning immediately.
Got part . Took off back control panel. I put the part on as your instructions guided me . SUCCESS!
I set the timer and pushed the button and the dryer began turning immediately.
Other Parts Used:
-
Sally from Newport News, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
11 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 1, 2023
will this part fix the dryer not starting unless the door is open?
For model number ferb6600fs0
Hi Mike, thank you for contacting us. First, check the door switch, part number PS2330880. If that does not take care of the issue, we recommend checking the following parts: selector knob, part number PS2330885, thermal limiter, part number PS419402, and drive motor, part number PS418132. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Robert
December 20, 2024
Will the timer still cycle (rotate) even if the dryer is not running
For model number GLGR1042FS0
Hello Robert, Thank you for your inquiry. If your dryer continuously runs after the time is up, this points to a faulty dryer timer. You can test it with a multimeter, setting it to the RX1 setting and place the probes on the terminals, the ohm reading should be between 2000-3000 and if it is not, then the timer is faulty. Good luck with your repair.
Was this helpful?
Thank you for voting!
Stephen
March 20, 2025
Start button only works intermittently, if I fiddle with the timer knob the start button eventually works. Is this most likely the start button or the timer knob and is there are way I can test them to be sure? Thanks
For model number FER211AS2
Hi Stephen,
Thank you for your question. To verify if the issue is with the push-to-start-switch or the timer, you will need to test these parts for continuity with a multimeter on the Rx1 setting to see if they are operating normally. Before removing and checking these parts, unplug the dryer from the electrical outlet. When checking the push-to-start-switch, you should receive a reading of zero. When checking the timer, you should receive a reading between 2000-3000 ohms. If your readings for these parts are different, then you will need to replace them. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS417898
Manufacturer Part Number: 131469000
Manufacturer Part Number: 131469000
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST