Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
Product Description
CATCH Specifications
Ensure your dryer operates smoothly with this replacement door catch, which helps keep the door firmly closed throughout each cycle. It’s compatible with various models and replaces older versions. Common signs that this part needs replacing include a door that won’t latch properly or opens unexpectedly during use. Installing a new catch is a quick fix that improves both safety and efficiency.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door Pops Open
This part works with the following products:
Dryer, Washer Dryer Combo, Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Crosley.
Part# W11429587 replaces these:
W10529190, W10610880, W10696503, W11224630, WPW10610880
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Dennis A - August 13, 2021
Verified Purchase
good part.
Revived part in good shape, fix right on with no problems and works well.
Bruce P - March 3, 2025
Verified Purchase
Simple Simon
Easy pleasie to install.
James D - September 18, 2021
Verified Purchase
Door catch
Very easy to install and quick delivery
Simon L - November 18, 2022
Verified Purchase
Exact replacement
The exact replacement but expensive especially with delivery cost!
Josie C - April 28, 2021
Verified Purchase
Easy Reoair
Delivery of the part was fast. The door catch part was easy to replace and the dryer door is now closing as it should.
Jennifer G - November 14, 2021
Verified Purchase
Exactly what was needed
Diagrams were very helpful in finding the part I needed. Able to close my dryer door now.
George S - September 8, 2023
Verified Purchase
Wow, very easy to replace. Video was an absolute help. Would have took the door apart but obviously no need to.
Part works as expected. Thanks so much.
Pierre B - March 28, 2021
Verified Purchase
Rapid delivery great service
Very good service
Bruce D - May 13, 2022
Verified Purchase
Correct part.
Part was exactly what was needed. Extremely easy to install. Took about 1 minute.
Fawaz S - November 4, 2021
Verified Purchase
Easy instal
Easy instal and highly durable, better then the original part
- < Prev
- 1
- 2
- Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 12 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken dryer door catch
Used the screwdriver pressed the blade against the edge of the door catch and popped it out. Put the new door catch in place and pressed it and it snapped into place. Done
Other Parts Used:
-
Preston from ETNA, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Catch was broken
Removed the plastic guard. Snapped the catch in place and replaced the guard
Other Parts Used:
-
Rosemary from RILEY, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
9 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door catch
The original door catch had broken and would no longer stay shut. Ordered the part from this site with ease. Very easy to replace the broken door catch on my Amana dryer. Tool needed was a flat head screwdriver to loosen the cover, remove broken piece and easily replace with new part. Followed the video and it was back to normal operation within minutes.
Other Parts Used:
-
Christine from Virginia Beach, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door catch on dryer door
Gently remove the door bezel by prying it off with a small screwdriver. Then remove the door catch from the door with the same screwdriver. Be careful not to drop it in the door. I did and had to fish it out with a small hooked pick. Install the new door catch by sliding the top in first then the bottom. Again, careful not to drop it in the door. Then snap the door bezel back in place.
Other Parts Used:
-
Anthony from NORTH ADAMS, MA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Dryer door would not latch. The door latch was broken and needed to be replaced.
Once I received the new latch I removed the latch cover with the flat head screw driver and worked out the old latch. I then positioned the new latch and snapped in place. I then replaced the cover and shut the Dryer door. The door latched and the repair was complete.
Other Parts Used:
-
Douglas from WINCHESTER, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stay closed.
Replaced door catch on dryer door. Followed video on Whirlpool website and it took less than 10 minutes. The dryer works great.
Other Parts Used:
-
Wanda from SHELBYVILLE, KY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door catch broke
Remove the protective cover on door with screwdriver, pop out the old catch, snap new catch in place, replace protective cover
Other Parts Used:
-
Debra from BLASDELL, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door catch had crackedt
took out old ,twisted in the new one it was nice to have the right part the first time!! thank-you
Other Parts Used:
-
stephen from tewksbury, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the metal plate connecting the door catch was broken, so I ordered the part
I pushed one end of the catch on upper side the hole and when locked, I pushed the other end of the catch to the lower side to get locked. To complete, the white cover was inserted on top of the catch and done.
Other Parts Used:
-
Cris from GLENDALE, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken plastic catch on dryer door
removed broken parts & snapped in new catch
Other Parts Used:
-
Ann from Brenham, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12745673
Manufacturer Part Number: W11429587
Manufacturer Part Number: W11429587
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST