This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 8 hrs and your part ships today!
This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model num...
This part is the replacement single front panel clip for your dryer. It is made of metal and is approximately 2 inches long and ¾ inch wide. The front panel retainer clip is what holds the front panel...
$20.99
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for 11062332510
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
December 14, 2022
Dryer is not heating
For model number 11062332510
Hello Richard, thank you for contacting us. We would recommend checking the dryer cycling thermostat, part number PS11741405, and the heating assembly, part number PS334313. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
My dryer will not turn on.
the dryer was working (sets outside on porch) electrical storm and rain occurring so I had reached up to turn off as door was opened and has not worked since that happened. It will not turn on(the button that is pushed to start the dryer).
I remember hearing a sound as it stopped.
Thank you,
Mary
For model number 11062332510
Hi Mary, thank you for your inquiry. Confirm the door is fully closed; the dryer will not start with the door open. Remove anything that is obstructing the door. If it is fine, we would first recommend checking the thermal fuse, part number PS11741460. Thermal fuse shuts off the motor in an electric dryer when the dryer overheats. If the dryer hums but does not start, the start switch is not at fault. If the dryer does not respond or make any noise, the start switch could be at fault. Use a multimeter to test the start switch, part number PS11754857, for continuity. We hope this information helps!
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
It was simple once I figured out what to do:). I removed the 2 screws on the top of the dryer... they were a bit hard to find. Even with the other descriptions on this site. I was removing things I didn't need to. The 2 screws you need to remove are under the LINT COLLECTOR LID. Remove those 2 screws & lift the lid... it will be tight at first. the front of the lid has 2 "catches" in the corners.
The hardest part was getting the door switch assembly to "unplug". We pried it off -- eventually -- & then simply plugged in the new one.
Saved me LOTS of money & was worth the 30 minutes - 1 hour of work.
As I said previously, once you realize how to get the lid up & manage to pry off the plug, that's all there is to it -- easy!