Lid Lock Assembly
Fits your MVW6230HW1!
$127.04
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your MVW6230HW1!
PartSelect Number
PS12731130
Manufacturer Part Number
W11394572
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Will Not Start | Locking Issues
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The lid was closed to hard causing the door strike, lid lock bezel and assembly to break.
Changing the door strike was simple just a quarter turn and it pops off. Changing the assembly, remove the screws from the back side at the top, move to facing the front of the machine pull the top toward you about a half inch and it will open. From the back unplug the correct wire, remove assembly and then install in reverse. Good luck.
Other Parts Used:
-
David from MOUNT CALM, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Enoch
December 17, 2022
Plastic clip broke that tells the washer the lid is closed. Can it be joined back together or will we need a new clip?
For model number MVW7232HCO
Hello Enoch, Thank you for your inquiry. If the lid lock assembly or lid strike are broken, then we would recommend replacing them. The lid strike is part# PS16218028. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
James
January 22, 2023
Installed new door lock assembly still having same issue,screen saying ,close lid ??
For model number MVW7232HW0
Hello James, thank you for contacting us. Check for wash media build-up (detergent, lint, etc.) at or near the lock or lock striker. Use a soft, damp cloth or sponge to wipe away any spills. If this does not help, we recommend replacing the door strike, part number PS16218028. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Related Parts:
Lisa
February 10, 2023
The lock on my top loader snapped not sure which part I need been looking but there are no pics…
For model number MVW6200KW0
Hello Lisa, thank you for your question. The Lid Lock Assembly PS12731130 is the correct part that you will need. Good luck with this repair.
Was this helpful?
Thank you for voting!
Mark
June 7, 2023
Washer lid does not close to let washer start
How do you remove part to see if it is broken
For model number Wtw8127LCO
Hi Mark, thank you for contacting us. A faulty lid lock assembly, part number PS12731130, might cause the door to not close properly. To check this part, we would suggest following these general instructions: Move the washer away from the wall, and remove the screws holding the control panel assembly using a quarter-inch nut driver. Insert a putty knife under the front corners of the control panel housing to release the clips securing the housing. Disconnect the user interface wire connector and set the control panel assembly aside. Unthread the rear screws securing the main top as well as the screws securing the access panel. Next, pull the main top forward, then partially lift it and detach the lid lock bezel. You may use a small flathead screwdriver to depress the retaining tab. Slide the lid lock to the left to release it from the main top. The lid lock assembly can be checked for any fault or damage. We would also suggest checking the door strike, part number PS16218028, and making sure it is not damaged or broken. This may also make the door not close properly. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
Denver
August 8, 2023
My washer says lid is lock and will not function and the lid will not latch at all. My ? is if I replace the lid lock latch assembly will this fix my issue
For model number MVW6200KW3
Hello Denver, thank you for a very interesting question. We believe your washer is having this problem because of the faulty lid lock assembly. We recommend you replace the lid lock assembly, part number PS12731130. If problem persists, we suggest you replace the electronic control board, part number PS16620497. Please submit a new question if you have any follow-ups!
Was this helpful?
Thank you for voting!
Related Parts:
Ron
September 5, 2023
the lid will not open and lid light just blinks
For model number MVW6200KW2
Hi Ron, thank you for your inquiry. We have concluded that the issue is with the lid lock assembly, part number PS12731130, which may need to be replaced. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12731130
Manufacturer Part Number: W11394572
Manufacturer Part Number: W11394572
Brand
Model Number
Description