This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 12 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 12 hrs and your part ships today!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$16.07
In Stock
Order within the next 12 hrs and your part ships today!
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
$33.17
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions And Answers for MVW6230HC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alicia
March 7, 2023
Washer won't drain and spin. stops before it gets to the cycle. If I put it on drain and spin nothing happens. Hose is not clogged. Have a pump coming today to try, If it isn't the pump what is the nest thing I should try?
For model number MVW6230HC0
Hello Alicia, thank you for the question. According to our research, we suggest checking the lid lock assembly, part number PS12731130. If this is fine, we recommend inspecting the drive pulley, part number PS10057144. If this is bad or broken, replace it. We hope this is helpful!
Washer does not drain. Drain hose is clear and not blocked, the only way I can drain it is to take the drain hose off
For model number MVW6230HC0
Hello Jamie, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the drain pump, part number PS12731177, to fix the issue. We hope this solves your problem!
When starting a new load, the washer does a leveling process. Almost every time this happens, it makes a very loud, high-pitched squeal. Like sneakers on a basketball court - only louder and for a full second or more. It only does this once, at the start of a new load. Not at any other time in the cycle. Any idea what is going on?
It's as though the brake is left partially engaged from the prior load.
For model number MVW6230HC0
Hi Bob, thank you for reaching out. Based on our understanding, we would recommend checking that the load is evenly distributed between both sides of the washer before setting up its cycle. If the issue persists, you may need to replace the drive belt, part number PS12578772. We hope that helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
