This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
This door strike is a crucial safety component in top-load washing machines, designed to engage with the door latch and keep the lid securely closed during operation. Located along the door frame, it helps prevent water leakage, accidental openings, and potential damage to the appliance. If the strike is worn or damaged, the washer may fa...Read moreil to start or stop mid-cycle. Replacing it promptly ensures safe and reliable performance. Installation is straightforward and requires no special tools.
Keep your top-load washer running safely and smoothly with this replacement lid lock assembly. It’s designed to secure the lid during active cycles, preventing interruptions and ensuring the machine operates only when properly closed. Whether your current latch is worn out or no longer functioning, this component offers a dependable fix. ...Read moreInstallation is straightforward, and it fits a variety of washer models, making it a practical choice for restoring peace of mind in your laundry routine.
This clutch slider kit is part of the transmission system in select washing machines, helping control the movement and speed of the agitator during wash and spin cycles. The kit includes a clutch band, slider, and lock ring, and allows the machine to start, stop, and shift speeds smoothly. If worn or damaged, it can cause issues like nois...Read morey operation, difficulty spinning, or failure to start properly. Replacing the kit restores proper function and helps maintain efficient performance.
This clutch assembly is designed for use in top-load washing machines, where it plays a crucial role in engaging the transmission during both the agitation and spinning cycles. If your washer is experiencing issues such as failing to agitate or spin properly, a worn or faulty clutch may be the cause. Replacing the clutch requires accessin...Read moreg the underside of the washer, and basic tools such as a socket wrench and screwdriver will be needed for installation. This component is sold with a single securing screw and is intended to restore proper mechanical function to your appliance, helping ensure smooth and efficient operation during wash cycles.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen - For model number MVW7230HW1
November 3, 2023
Does this model have a filter that should be cleaned? Sometimes there is a lot of lint on the clothes that have been washed.
Hello Karen, thank you for reaching out. Your model comes with the drain pump filter, part number PS16660526. It must be cleaned regularly. If the filter is clogged, the water from the wash and rinse cycle with all the lint drains too slowly and leave deposits on your clothes. Glad to be of help!
owned this for roughly 6 mos
it will not do anything except it says sensing for a few minutes then it say wash complete. From what i’ve read it’s a common problem with this model most say clutch is bad and needs replaced
HOW SAD WE SPEND OUR HARD EARNED MONEY ON A “maytag” ONLY TO DISCOVER THEY ARE JUNK AND WONT STAND BEHIND THE PRODUCT OR AT LEAST THE LABOR
Hello Tim, Thank you for your inquiry. Researching your model, we show it can be an issue with the water level pressure hose, the water level pressure switch which is part of the control board, the water inlet valve, the lid lock or the lid strike. You can test the parts with a multimeter. It can also be a loose wiring connection going to the drain pump, so test the connections and look for any loose or damaged wires, Good luck with your repair.
Does it have a lint filter. My clothes are covered with lint after the cycle.
Hello Marc, thank you for your question. The Washer Drain Pump Filter PS16660526. If this is not the to fix the issue. It traps all the dirt and residue from clothes. Often these filters can sit uncleaned causing the washer to smell. You will find it inside the outer drum shell PS12730826. We hope this helps!
Was this helpful?
Thank you for voting!
Tim - For model number MVW7230HW1
August 15, 2025
Loud when it spins, sounds like it’s going to take off
Hi Tim, thank you for reaching out. The issue is most probably because of the fault in bearings. They come attached to the gear case, part number PS16730208. You may need to replace it to fix the issue. We hope this sorts out your problem!
I took the hoses off and lost the blue filter, replaced the hoses and now when it off the water keeps dripping
Hi Gale, thank you for your inquiry. The “blue filter” is likely a protective screen that sits inside the washing machine's water inlet valve connection point. Look for any visible debris or damage in the connection port on the machine's back. Unscrew the hose from the back of the washing machine and ensure a rubber washer/gasket is present and properly seated inside the hose coupling. If the rubber washer is fine and the dripping persists, you will need to replace the water inlet valve, part number PS16744968, to fix the issue. Glad to be of help!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tab on door strike got broken off and washer would not operate without it.
45 of 56 peoplefound this instruction helpful.
John from AURORA, CO
Very Easy
Less than 15 mins
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
Was this helpful?
Thank you for voting!
Broken lid catch/strike
22 of 26 peoplefound this instruction helpful.
Brian from Cheney, WA
Very Easy
Less than 15 mins
Pliers
Rotate the broken piece counter clockwise in the socket in the lid to release it. Install the new one in a clockwise rotation.
Was this helpful?
Thank you for voting!
Snapped off door strike
16 of 19 peoplefound this instruction helpful.
Miranda from WEST FARGO, ND
Very Easy
Less than 15 mins
Super easy repair, simply turn the broken door strike counterclockwise to remove; insert the new door strike into the slots and turn clockwise to lock into place.
My Orders
