This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This door strike is a crucial safety component in top-load washing machines, designed to engage with the door latch and keep the lid securely closed during operation. Located along the door frame, it ...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
Keep your top-load washer running safely and smoothly with this replacement lid lock assembly. It’s designed to secure the lid during active cycles, preventing interruptions and ensuring the machine o...
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
$42.76
In Stock
Questions And Answers for MVW6200KW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
14 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
May 13, 2023
Water runs continuously during cycle, suspect inlet valve stuck open
For model number MVW6200KW2
Hello Dave, thank you for reaching out. We would recommend replacing the water inlet valve, part number PS12349461, to fix the issue. It controls the water flow into the washer. We hope this solves your problem!
Washer display comes on, sensing light flashing, still lid latch not engaging even after replacing lid switch assembly. Any suggestions?
For model number MVW6200KW2
Hello Scott, thank you for your inquiry. Based on our understanding of the issue, we would suggest replacing the door strike, part number PS16218028, to solve the problem. We hope this helps, good luck with this repair!
Is there an agitator kit to add onto this model washer? I have seen other Maytag model washers that had interchangeable agitator or paddles.
For model number MVW6200KW2
Hi Rodney, thank you for your question. According to our research, your model does not have an agitator repair kit. Your model comes with a wash plate, part number PS11769534. We hope this information helps!
I need a part for the mother board and lid latches.
For model number MVW6200KW2
Hi Monica, thank you for contacting us. The control board for your model is part number PS16620431. The parts that are involved in locking the lid shut are the lid lock bezel, part number PS16555327, and the lid lock assembly, part number PS12731130. We hope this information is useful!
My machine won't do the wash cycle or the spin cycle
For model number MVW6200KW2
Hi Richard, thank you for contacting us. We would recommend checking the drive clutch kit, part number PS10057144. It attaches to the drive belt and rotates the spin basket drive shaft. You may need to replace it to fix the issue. We hope this solves your problem!
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
