MVW7232HC0 Maytag Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
DOOR STRIKE – Part Number: W11457841
$28.23
In Stock
DOOR STRIKE
★★★★★
★★★★★
(13)
Part #W11457841
This door strike is a crucial safety component in top-load washing machines, designed to engage with the door latch and keep the lid securely closed during operation. Located along the door frame, it helps prevent water leakage, accidental openings, and potential damage to the appliance. If the strike is worn or damaged, the washer may fail to start or stop mid-cycle. Replacing it promptly ensures safe and reliable performance. Installation is straightforward and requires no special tools.
Water Inlet Valve – Part Number: W11165546
$114.55
In Stock
Water Inlet Valve
★★★★★
★★★★★
(18)
Part #W11165546
This washing machine inlet valve is a genuine OEM replacement part designed to regulate water flow during the fill cycle. Controlled by an internal solenoid, the valve opens and closes as needed to allow hot and cold water into the appliance. It features two inlet ports and three push-on connectors for integration with the washer’s internal plumbing. A malfunctioning valve may result in slow or incomplete filling, water leaks, or failure to start the cycle. Installation requires basic tools such as a screwdriver and wrench, and the appliance should be disconnected from power and water sources before beginning. Compatibility should be verified using your washer’s model number.
Washer Drain Hose – Part Number: W11244231
$37.25
In Stock
Washer Drain Hose
★★★★★
★★★★★
(4)
Part #W11244231
The drain hose carries used water from the washer to your house drain.
Hose Clamp – Part Number: WP285655
$15.68
In Stock
Hose Clamp
Part #WP285655
This hose clamp is sold individually.
Wash Plate – Part Number: W10902814
$146.22
In Stock
Wash Plate
★★★★★
★★★★★
(11)
Part #W10902814
This wash plate is for washers Unplug the washer and shut off the water supply before installing this part
Washer Washplate Screw – Part Number: W10752187
$12.05
In Stock
Washer Washplate Screw
Part #W10752187
LATCH – Part Number: W11700916
$81.65
In Stock
LATCH
★★★★★
★★★★★
(1)
Part #W11700916
Keep your top-load washer running safely and smoothly with this replacement lid lock assembly. It’s designed to secure the lid during active cycles, preventing interruptions and ensuring the machine operates only when properly closed. Whether your current latch is worn out or no longer functioning, this component offers a dependable fix. Installation is straightforward, and it fits a variety of washer models, making it a practical choice for restoring peace of mind in your laundry routine.
Washer Hose Clamp – Part Number: WP356138
$15.07
In Stock
Washer Hose Clamp
Part #WP356138
This clamp helps to prevent leaking by holding the end of water hose in place.
SLIDER – Part Number: W10734521
$60.45
In Stock
SLIDER
★★★★★
★★★★★
(2)
Part #W10734521
This clutch slider kit is part of the transmission system in select washing machines, helping control the movement and speed of the agitator during wash and spin cycles. The kit includes a clutch band, slider, and lock ring, and allows the machine to start, stop, and shift speeds smoothly. If worn or damaged, it can cause issues like noisy operation, difficulty spinning, or failure to start properly. Replacing the kit restores proper function and helps maintain efficient performance.
CLUTCH – Part Number: W10754448
$156.31
In Stock
CLUTCH
Part #W10754448
This clutch assembly is designed for use in top-load washing machines, where it plays a crucial role in engaging the transmission during both the agitation and spinning cycles. If your washer is experiencing issues such as failing to agitate or spin properly, a worn or faulty clutch may be the cause. Replacing the clutch requires accessing the underside of the washer, and basic tools such as a socket wrench and screwdriver will be needed for installation. This component is sold with a single securing screw and is intended to restore proper mechanical function to your appliance, helping ensure smooth and efficient operation during wash cycles.
Impact Absorber – Part Number: WP8564458
$14.95
In Stock
Impact Absorber
Part #WP8564458

Questions And Answers for MVW7232HC0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BRENDA - For model number MVW7232HC0
March 10, 2023
Can I order an agitator for this washer, I purchased it without the agitator and do not like it at all.
Chris Boyle Profile
Hello Brenda, Thank you for your inquiry. Sadly, we do not show a compatible agitator for this model and that it appears to only use the wash plate. We hope this helps.
Was this helpful?
Thank you for voting!
Mike - For model number MVW7232HC0
June 3, 2022
Display reads "add garment" then sensing, does nothing after that and says complete?
Chris Boyle Profile
Hello Mike, Thank you for the question. During the wash cycle, this will display to let you know the cycle is in progress. Add Garment - When “Add Garment” is lit, you may pause the washer, open the door, and add items. Touch and hold START to start the washer again. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Wes - For model number MVW7232HC0
February 21, 2023
Machine touch pad shows no sign of power. Stopped in mid cycle and laundry lid is locked trapping laundry inside. Receptacle power is present, and I can’t find a reset button, if there is one.
Chris Boyle Profile
Hi Wes, thank you for reaching out. The following parts need to be checked to fix the issue: the noise filter, part number PS16744969, the control board, part number PS12745529, and the drain pump, part number PS12731177. We hope this sorts out your problem!
$214.79
In Stock
Drain Pump Assembly
$461.05
In Stock
Electronic Control Board
$62.30
In Stock
FILTER
Was this helpful?
Thank you for voting!
Ivan - For model number MVW7232HC0
February 10, 2024
sounds like bearings bad
Chris Boyle Profile
Hi Ivan, thank you for reaching out. According to our research, the bearings for your model do not come separately. They come with the transmission assembly, part number PS16730208. You may need to replace it to fix the issue. We hope this sorts out your problem!
$387.00
In Stock
Gear Case
Was this helpful?
Thank you for voting!
Jane - For model number MVW7232HC0
December 9, 2024
My washer repeatedly tells me it does not detect water, it may have 1/2 tub, it will also come on in middle of night yo start a 3hr soak cycle, I don’t have a soak cycle selection, it might fill with water (I always use deep fill) because I don’t want my clothes torn apart when it agitates with practically no water, Help
Chris Boyle Profile
Hi Jane, Thank you for your question. If the washer is not detecting water coming into the washer and it turns on by itself, the electronic control board is malfunctioning and it will need to be replaced. The part number for the electronic control board is PS12745529. We hope this helps!
$461.05
In Stock
Electronic Control Board
Was this helpful?
Thank you for voting!
  • 1
  • 2

Common Symptoms of the MVW7232HC0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tab on door strike got broken off and washer would not operate without it.
45 of 56 people found this instruction helpful.
  • John from AURORA, CO
  • Very Easy
  • Less than 15 mins
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
Was this helpful?
Thank you for voting!
Broken lid catch/strike
22 of 26 people found this instruction helpful.
  • Brian from Cheney, WA
  • Very Easy
  • Less than 15 mins
  • Pliers
Rotate the broken piece counter clockwise in the socket in the lid to release it. Install the new one in a clockwise rotation.
Was this helpful?
Thank you for voting!
Faulty fill valve
18 of 22 people found this instruction helpful.
  • Marian from GREYBULL, WY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Did troubleshooting after code LF showed on indicator window. Did troubleshooting; checked hoses for obstructions and small filters on inlets. All good. Ordered new fill valve. Came in a few days, good service.
Removed control panel top by removing screws on back of control panel, then by pushing putty knife under each side to rele ase spring clips. Carefully lifted cover and set onto lid. Photographed fill valve at left side as you are standing in front of machine. Removed screws with small ratchet. Carefully removed wires via clips. Lifted out valve.
Attached wires to new, set back into its place, replaced screws, tightened but not too tight so as to break part. Replaced control panel, pushing downward to engage spring clips, then replace screws on back.
Re attached hoses, ensuring they were on the correct sides, plugged machine into power, ran through cycle and VIOLA!! Worked perfectly!! After a couple weeks, still working perfectly! Was VERY happy it was only fill valve and not mother board as the cost was a fraction.
I found trouble shooting videos to be very helpful. Your service quite good.
Was this helpful?
Thank you for voting!