This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 10 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 10 hrs and your part ships today!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$16.07
In Stock
Order within the next 10 hrs and your part ships today!
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
$43.01
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for WTW5100HC2
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marvin
9 days ago
It's check the water inlet, I've been disconnecting the hose the water runs freely, then reconnect, it runs and then get the same signal
For model number WTW5100HC2
Hello Marvin, thank you for contacting us. Based on our research, we would recommend checking the water hose for any clogging. If the hose is clear, then the issue is most probably with the water inlet valve, part number PS12348013. You may need to replace it to fix the issue. We hope this solves your problem!
F7e1 error code. Already changed the shift actuator
For model number WTW5100HC2
Hi Jason, thank you for getting in touch. Based on our research, the F7E1 error code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. We would recommend replacing the washer control board, part number PS16620465. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.