Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Geoffrey P - February 9, 2022
Verified Purchase
Was easy to order from.website thanks to the information provided on website.
Order arrived quickly. Was happy with service provided.
★★★★★
★★★★★
Kristine O - August 9, 2020
Verified Purchase
Very Fast Shipping and Easy to Install!
My 10 year old washer was starting to malfunction and after researching this would be the part to buy. I ordered before noon and the product arrived within 24 hrs! Very fast and works perfectly! Note I did have to order a 2nd part - Front Load Washer Door Lock and Switch Assembly to fully fix my washer issue - but once both of them were installed - the washer works again like new!
★★★★★
★★★★★
Claude F - December 1, 2020
Verified Purchase
Excellent condition of part, appliance work as expected
The part came very fast, and washing machine work as new
★★★★★
★★★★★
Eran E - July 30, 2020
Verified Purchase
Easy repair, part not fully as expected
The part arrived quickly and the repair was relatively easy. The part works but not as good as the original one. The washing machine has a rotating knob for selecting the washing program. The knob is external (not part of the PCB) and connects to an element on the PCB via a plastic rod. When you rotate the knob it rotates the PCB element and also points to printing on the panel that indicates the selected program. With the new part we could not get the knob positions to fully align with the printing on the panel so you have some ambiguity as to what program you had selected. It seems that it may be a OEM and not an original part.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer Would Not Go Thru It's Cycles,Power Surge!
Removed top by removing screws in rear. Removed front panel. Remove control panel from front panel. Remove printed circuit board. Found printed circuit board with melted part from the power surge. Ordered part. Mark the eletrical plugs,as you remove them so you put them back in order. Do not tip front over, you'll loose the little springs that push buttons out! Align two shafts so board will go back together. Reassmble in opposite order.
Other Parts Used:
ROBERT from JACKSON, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 3, 2019
Will not complete a wash cycle. Stops with water in the tub, or does not spin fast enough to wring the water out of clothes
For model number CFW4000FW1
Hello Mike, thank you for writing. This may be due to either a faulty Drain Pump, part number PS7783938, or Door Lock and Switch Assembly, part number PS12364048 for your model. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Patrick
January 17, 2022
Washer turns on without anyone engaging it! Sometimes turns on at night by itself! Will replacing the control board remedy this problem?
For model number FTF2140ES0
Hello Patrick, Thank you for the question. Normally this is an indication the Washer Electronic Control Board is faulty and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 22, 2021
This washer "end of wash cycle" signal randomly starts beeping. How is this fixed?
For model number LTF2140FS2
Hi Terry,
Thank you for your question. If your washer has run 30 wash cycles, the beeping is a reminder that you need to run the clean wash cycle. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Dave
May 15, 2023
I did the diagnostic test for this Frigidaire washer that is not completing a spin cycle and leaving water in the tub at the end of a regular cycle. All tests worked but there was an error code of 43 at the end of the test which states it needs a new control board. I ordered one from you all but it sounds like sometimes this part is misdiagnosed. Just wanted to know what else this could be if the control board replacement doesn't fix it. Thanks.
For model number FTF2140FS1
Hello Dave, thank you for reaching out. The error E43 is related to the control board. In this error code, the control board thinks the door locking has an issue. If replacing the control board, part number PS12724037, does not fix the issue, then the problem is with the door lock assembly. You may need to replace the door lock assembly, part number PS12364048, to resolve the problem. We hope this information helps!
Electrolux washer stopped. Has 9 beep code then repeats. Will not do anything. Have to shut off breaker to stop beep sequence.
For model number LTF2140FS2
Hello Tim, thank you for your inquiry. According to our research, this message indicates that there is a problem with the electronic control board, part number PS12724037. You may need to replace it to fix the issue. Glad to be of assistance!
Was this helpful?
Thank you for voting!
RICK
December 21, 2023
All the lights on the right of the display panel are flashing doorlock, wash, rinse, final spin, control lock sysmbel and beeping they go off for 5 seconds and then start doing it all over again. would replacing the control panel fix this?
For model number LTF2140FS2
Hi Rick, thank you for the question. Based on our understanding, we would recommend checking the door lock first. If it is fine, the issue is most probably with the control board, part number PS12724037. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Abigail
June 21, 2024
Electronic panel lights up for all washes / features, but has slowly stopped washing on all the cycles but sport. Started with normal not working (lights up but when you press start it never kicks in adding water etc.) then has slowly eliminated all the different cycles except sport.
For model number LTF2140FS1
Hi Abigail, thank you for contacting us. Based on our understanding of the issue, we would suggest replacing the control board, part number PS12724037, to solve the problem. It manages the washer's functions such as filling, washing, draining and spinning. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Monty
September 14, 2022
Machine will spin during wash cycle, but high speed spin will not engage. Drain is clear, pump is working. When the high speed spin tries to engage there is humming sound but no movement. Checked the door lock, that works as it should. Main control board will come on by it's own sometimes. Not sure if the main board or the motor control board is the culprit here, leaning towards the electronic control. Any thoughts?
For model number LTF2140FS1
Hello Monty, thank you for contacting us. From the symptom of the humming sound, we can suspect the drive motor, part number PS2373340, is most probably faulty. It is also possible that the electronic control board, part number PS12724037, is defective and not energizing the door lock. The electronic board manages the spinning while the drive motor executes it. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Washer-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"137005000NH","title":"137005000NH","url":""}]
