FEED PAWL 9R205576

This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to push each nail into place when the trigger is pulled, ensuring smooth and consistent operation. Over time, the pawl can wear out, break, or lose its proper rotation, leading to feed issues or misfires. Replacing the feed pawl is a straightforward process that requires only a screwdriver and a punch. Begin by removing the hinge pin and spring from the mount using a punch. Then, push out the hinge pin securing the old pawl and remove both the pawl and pin. Install the new feed pawl along with its spring and hinge pin, and reassemble your nailer. While replacing the pawl, it’s also a good idea to inspect the feed pawl spring for wear, as it may need replacement as well.