RN175C (Type 1) Porter Cable Nailer - Overview
Sections of the RN175C
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
FEED PAWL
PartSelect #: PS12503745
Manufacturer #: 9R205576
This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to pu...
$28.14
Special Order
O-RING
PartSelect #: PS12505033
Manufacturer #: 88998
This is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The o-ring is part of the nose assembly. This item is used to seat t...
$5.95
In Stock
Questions And Answers for RN175C
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!