RN175CR (Type 1) Porter Cable Nailer - Overview

Sections of the RN175CR

[Viewing 1 of 1]
Section 1 Diagram and Parts List for Type 1 Porter Cable Nailer
Section 1
Keep searches simple, eg. "belt" or "pump".
DOOR PIVOT PIN – Part Number: 9R210173
DOOR PIVOT PIN
PartSelect #: PS12508141
Manufacturer #: 9R210173
$5.95
  Special Order
COLLAR-SPRING – Part Number: 149853
COLLAR-SPRING
PartSelect #: PS12413163
Manufacturer #: 149853
$5.95
  Special Order
CHECK PAWL PIN – Part Number: 9R210179
CHECK PAWL PIN
PartSelect #: PS12510793
Manufacturer #: 9R210179
$5.95
  Special Order
CANISTER LATCH – Part Number: 9R205561
CANISTER LATCH
PartSelect #: PS12510765
Manufacturer #: 9R205561
$11.34
  Special Order
PIN-ROLL-3MM X 10MM – Part Number: MPG030010
PIN-ROLL-3MM X 10MM
PartSelect #: PS12522422
Manufacturer #: MPG030010
$5.95
  Special Order
COVER – Part Number: 184432
COVER
PartSelect #: PS12426150
Manufacturer #: 184432
$5.95
  Special Order
O-RING – Part Number: 9R196690
O-RING
PartSelect #: PS12512309
Manufacturer #: 9R196690
$5.95
  Special Order
STOP-FEED PISTON – Part Number: 149855
STOP-FEED PISTON
PartSelect #: PS12417198
Manufacturer #: 149855
$5.95
  Special Order
QUICK CONNECT – Part Number: 9R195624
QUICK CONNECT
PartSelect #: PS12512300
Manufacturer #: 9R195624
  No Longer Available
FEED PAWL – Part Number: 9R205576
FEED PAWL
PartSelect #: PS12503745
Manufacturer #: 9R205576
This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to pu...
$28.14
  Special Order
O-RING – Part Number: 88998
O-RING
PartSelect #: PS12505033
Manufacturer #: 88998
This is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The o-ring is part of the nose assembly. This item is used to seat t...
$5.95
  In Stock
NUT-NYLON M3X.50 – Part Number: MHE3050-100
NUT-NYLON M3X.50
PartSelect #: PS12521246
Manufacturer #: MHE3050-100
This lock nut is sourced from original equipment manufacturer for use with Bostitch nailers and staplers. It is a high quality hardware that has multiple applications depending on your tool. Please ma...
$5.95
  In Stock
Back to Top
View More

Questions And Answers for RN175CR

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More