RN46 Bostitch Nailer - Overview
Sections of the RN46
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
FEED PAWL
PartSelect #: PS12503745
Manufacturer #: 9R205576
This genuine replacement feed pawl is designed for use in various models of roofing nailers and is a key component of the tool’s feeding system. Positioned on the feed bar, the feed pawl rotates to pu...
$31.53
Special Order
O-RING
PartSelect #: PS12505033
Manufacturer #: 88998
This is a genuine Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The o-ring is part of the nose assembly. This item is used to seat t...
$7.44
In Stock
NUT-ESN M6X1
PartSelect #: PS12525364
Manufacturer #: MHE6100-100
This is a genuine replacement part manufactured for use with pneumatic nailers. This special metal nut is compatible with several types of nailers, and is typically used to secure the magazine bracket...
$7.44
In Stock
SCREW-SHCS-M6X1.00X3
PartSelect #: PS12527121
Manufacturer #: MSC6100-30
It is a genuine replacement part that is supplied by original equipment manufacturer for use with Bostitch nailers and staplers. This screw is used to secure the frame bottom to the frame overmold. Pl...
$7.44
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!