Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST
TRASH COMPACTOR TOUCHPAD W11050447
Fits your GC900QPPB0!
$133.81
Special Order
Fits your GC900QPPB0!
PartSelect Number
PS11775327
Manufacturer Part Number
W11050447
Manufactured by
Whirlpool
Product Description
TRASH COMPACTOR TOUCHPAD Specifications
Give your trash compactor a fresh look with this genuine control panel overlay. It’s simple to install—just peel and stick—and provides a sturdy surface for smooth operation. If your old panel is scratched or worn, this replacement is an easy way to make your appliance look new again while keeping it working properly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Trash Compactor.
This part works with the following products:
Whirlpool.
Part# W11050447 replaces these:
AP6042015, 9872017B
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the operating buttom membrance was cracked
1Turn the compactor off
2Removed the plate on the top of the compactor. Mine was held by 2 screws.
Make note of where the electrical connections are located
3Remove the electrical connections on the operating plate.
4Remove 2 screws holding the plate to the compactor
the unit housing the operating buttons is now free from the compactor
using a small blade move around the outside of the membrane to release the existing cover
Clean the lip where glue still exists
peel back the plastic cover from the part and press into place
Reverse steps 1,2,3 &4
2Removed the plate on the top of the compactor. Mine was held by 2 screws.
Make note of where the electrical connections are located
3Remove the electrical connections on the operating plate.
4Remove 2 screws holding the plate to the compactor
the unit housing the operating buttons is now free from the compactor
using a small blade move around the outside of the membrane to release the existing cover
Clean the lip where glue still exists
peel back the plastic cover from the part and press into place
Reverse steps 1,2,3 &4
Other Parts Used:
-
Ken from SOMERSET, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing parts that were beginning to rust from outdoor exposure.
I had no problem. My husband is an engineer, so the repairs went well. The only problem I did have was that one of the parts did not arrive. come to find out that it was on backorder and arrived a day or two after I called. The person I spoke with when I inquired was most helpful and expeditious. All in all, my experience was excellent.
Other Parts Used:
-
J. Dawn from Key West, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
2 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11775327
Manufacturer Part Number: W11050447
Manufacturer Part Number: W11050447
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 8pm EST