This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
This part is located at the bottom of your compactor and helps the drive motor power the compacting ram. If the drive gear is broken, damaged, or noisy, we suggest replacing it right away to avoid causing any more issues with your trash compactor. This kit includes the gears, washers, retainer clip, ram stop, and ram cam. This drive gear ...Read morekit is a genuine OEM part, is white in color and made from plastic. Please remember to disconnect the power before starting your repair.
This top limit and direction switch controls power to the trash compactor motor, it stops the motor when the ram reaches the top, a bad switch may cause the ram to get stuck, keep the motor running, or stop the compactor from starting, unplug the compactor before repair, check the model number before ordering
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eugene - For model number GC900QPPB6
May 20, 2022
Will not start
Hello Eugene, Thank you for the question. With the information provided, this could indicate the Selector Off Switch is faulty and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need the control panel for this. The part number is W107236. The support bracket for the start switch broke.
Hello Glenna, thank you for reaching out to us. If the control housing panel has broken, you will need to replace the housing, part number PS17647904. We hope this information helps!
Was this helpful?
Thank you for voting!
Jim - For model number GC900QPPB6
February 18, 2023
I need to replace the directional switch but don't know how to remove the access door.
Hello Erik, thank you for reaching out. There are a few simple steps to remove the access door. First, you will require a flat-blade screwdriver and a quarter-inch open-ended wrench. Following are the steps that can help you:
1. First depress the foot pedal and pull the container drawer assembly and lift it off the track.
2. On the top front control panel is present.
3. Remove screws from the top of the control panel and let it hang with the help of wires.
4. Now look for the switch and remove the screws that hold the directional switch.
We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Jan - For model number GC900QPPB6
November 28, 2023
My compactor is 2 years old, it will not turn on.
there are two switching on the inside of the drawer could they be bad?
Hi Jan, thank you for reaching out. Based on the description that you have provided, we would recommend checking the safety switch, part number PS405439, to fix this issue. We hope this is helpful!
When running the compactor begins "banging" and will not stop at the end of cycle. I replaced the Directional Switch (WP777811) but no change. I also tested the old directional switch and it seems to be functioning properly. What now? The Three Button Front Panel that includes the On, Off ?
Hi Chris, thank you for contacting us. Based on our understanding, we would suggest checking the drive gear, part number PS398589. You may need to replace it to fix the issue. We hope this sorts out your problem!
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.
... Read morer />Removed the drive gear and the washer. Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
I pulled the trash compactor out from under the counter.
I took out the four screws that kept the top cover in place to expose the ram.
The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical
... Read more directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.
Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Read less
Was this helpful?
Thank you for voting!
Compactor motor kept running after cycle ran, making alot of noise and unit jumping around.
34 of 42 peoplefound this instruction helpful.
Keith from Keller, TX
Easy
15 - 30 mins
Screw drivers, Socket set
Pulled the Compactor from underneath cabinet, unplugged power. Removed the top plate off compactor to expose the crush piston. Removed the front control panel by removing two phillips screws, wiring and directional (limit) switch is now exposed. Removed the two screws securing switch, removed wiring one wire at a time and replaced on new
... Read moreswitch in same position. Replaced switch in same manner as removed, and followed reverse of above to re-assemble. Plugged back in and tested, problem resolved works like new. Only took possibly 30" to repair and saved an expensive service call.
My Orders
