Product Description
Door Seal Lower Specifications
This dishwasher door seal replaces is made to fit multiple Whirlpool dishwashers. If your dishwasher started leaking from the front edge or bottom this part may need to be replaced.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# W10909089 replaces these:
AP6034205, W10667473
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Christopher D - November 10, 2023
Verified Purchase
Easy Replacement, however dishwasher still leaking
The part was shipped quickly and in great condition. replacement was straight forward, however still leaking post replacement.
Willian C - August 5, 2022
Verified Purchase
Original part as it should be
The part was new and original as it should be.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher door leaking
First off, this part does not look like a seal. It seems more like a trim piece. It is the only part along the bottom of the DW door so it is indeed a seal, and the DW was leaking after I replaced the seal around the tub and the door. First take off the inner panel of the door by removing the Torx screws on the edge and the hinges. Pay attention to which hole each screw came out because they are different lengths. Gently separate the inner panel being careful with the wires going to the detergent dispenser. The seal is held on by 5 small hex head screws on the bottom of the door panel. Remove the old one and install the new one. Put the door panel back together and on the hinges. Good luck.
Other Parts Used:
-
Paul from HGHLNDS RANCH, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
24 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher leaking from door
it was ok if I would have been sent the correct part, but you sent me the wrong part # and I had to go to the post office and mail it back. the part was not the same number as my order and completely wrong, still waiting for my refund and shipping charges. So you have failed me.
Other Parts Used:
-
michael from TUCSON, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Socket set
12 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Herbert
January 22, 2023
I have replaced the large rubber seal around the tub, and it still leaked. I then replaced the bottom door seal, and it seems to leak even more. Not sure how this plastic piece even seals the bottom door.
Should there be some sort of rubber on the bottom seal? Is there something I am missing.
For model number WDTA50SAHZ0
Hello Herbert, Thank you for your inquiry. We do not show that there is any rubber on the bottom door seal, which is designed to seal the gap between the opening to the dishwasher tub and the outer edge of the door. You mentioned you replaced the seal around the tub PS11731683 so we would also recommend checking the door seal part# PS12348515. If that does not fix the issue, you may want to look at the filter, drain pump, circulation pump or hoses to see if there is any visible damage. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lynn
November 29, 2023
My husband has replaced the rubber door seal as well as the Lower Door Seal and my dishwasher continues to leak in the front of the unit. I am just wondering if there was something that wasn't done correctly on the Lower Door Seal to make it leak more. Is there a video of installing that because I haven't found one yet. Thank you in advance for any help you can provide. We have had the door apart at least 4 times trying to figure out if we did something wrong. <><
For model number WDTA50SAHZ0
Hello Lynn, thank you for the great question. Based on the description that you have provided, we would recommend checking the bottom door seal, part number PS11766757, to fix the issue. We have attached the relevant video link. The video may not be of the exact model but will help you. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Douglas
April 21, 2024
Came here to learn if my dishwasher was somehow missing a bottom seal, since food gets trapped under the door, contributing to my pink slime problem. Appparently this gap under the plastic trim (what they call a seal) is a design "feature" of this dishwasher.
For model number JDTSS244GS0
Hi Douglas, thank you for getting in touch. The door seal, part number PS11766757, seals the gap between the opening to the dishwasher tub and the outer edge of the door. There is no seal under this. We hope that helps!
Was this helpful?
Thank you for voting!
Colleen
August 15, 2023
What are the dimensions of this bottom door seal?
For model number WDTA50SAHZ0
Hello Colleen, thank you for the question. According to our research, the dimension of this part are: 22.5 x 1.85 inches. We hope this information helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11766757
Manufacturer Part Number: W10909089
Manufacturer Part Number: W10909089
Brand
Model Number
Description