Part Location Diagram of W10876537 Whirlpool Dishwasher Drain Pump
See part 14 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Dishwasher Drain Pump W10876537

★★★★★
★★★★★
9 Reviews

Rated by 6 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$83.13
  In Stock

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11738151
Manufacturer Part Number W10876537
Manufactured by Whirlpool
Product Description

Dishwasher Drain Pump Specifications

This drain pump is for dishwashers. Drain pump removes the water from the dishwasher tub during the drain phase of the dishwashing cycle. Unplug the dishwasher and shut off the water supply before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not draining | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Amana, KitchenAid.
Part# W10876537 replaces these:
AP6004843, W10537634, W10724439, W10876537VP, W11219380
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.9
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dish washer would not drain properly
Shut off breaker. Took off front skirt of dishwasher .
Used pliers to loosen the pressure clamp on drain pump , have towel handy as there will be some water. Turn pump to left as you push in on the clip on side of drain pump. It will come out. Remove wire plug from old pump and plug into new pump than insert new pump and turn and push in till it clicks. Use pliers to pinch hose clamp and push hose onto pump release hose clamp. Turn breaker on. Run a cycle and make sure all is tight before putting skirt on front.
Other Parts Used:
  • Kelli from BURLINGTON, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump Plastic impeller broke inside
Located drain pump under dishwasher disconnected electrical from wall and pump twisted pump to remove, and installed new pump. Great customer service from Parts Select, helped to make sure i was ordering the correct part.
Other Parts Used:
  • Hector from RCH CUCAMONGA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was not draining, did not hear motor
Installed new pump from the front. Power off remove front cover reached my hand behind pump for release clip, push down turned counter clockwise pump comes out. Disconnected electrical plug attached plug to new pump. Put pump in at 45 degrees rotated clockwise until hear clip lock in . Tested then replaced cover
Other Parts Used:
  • KEVIN from BEL AIR, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not draining
Very easy to twist off the old pump and replace with new part. Worked perfect after replacement! We just followed you tube instructions
Other Parts Used:
  • Tina from BLOOMINGTON, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DISHWASHER WOULDN'T DRAIN
1. Shut off water valve
2. disconnect water hose(wrench-adjustable)
3. Disconnect drain hose (screwdriver)
4. Pull dishwasher out from under counter
5. Put down towel to soak up residual water that drains out of dishwasher
6. lay dishwasher face down; electronics is located underneath dishwasher.
7. locate faulty drain pump
8. remove electrical connector from drain pump by first pressing on connector retention tab with screwdriver while sliding connector loose.
9. twist drain pump body while using screw driver to depress drain pump retention tab.
10. remove old drain pump body and insert and twist new drain pump body into old location (use screw driver to assist retention tab engagement)
11. attach electrical connector.
12. Return dishwasher to upright position, slide it under the counter (with its cotton cover); reconnect hoses AND turn water supply back on (make sure you remember to turn the water supply back on)
Other Parts Used:
  • James from SACRAMENTO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher didn't drain.
Replaced the pump.That wasn't the problem --- if I had it to start over, I'd pull the drain hoses and run the dishwasher to see what water is flowing where. I had a clogged drain --- and maybe something else. Still working through the details.
Other Parts Used:
  • Bart from Ellicott City, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

18 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
January 16, 2019
When dishwasher should go to drain cycle, it hums and then powers off. Hose and filter are clear.
For model number KDTE104ESS
PartSelect logo
Hi Nancy, Thank you for your question. If the dishwasher is not draining and you are hearing humming sound and then it shuts off, the issue could could be the motor or there is debris in the impellers, you will need to inspect the motor to verify the cause. I hope this helps. Thank you and have a great day!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Chad
April 2, 2018
It will not drain, it would not push any water through the hoses but if you take the hose a loose play me a water comes out. I flush the hoses with them little packs that you clean it with.
For model number ADB1300AFW1
PartSelect logo
Hi Chad, Thank you for the question. I suggest checking the drain pump for a clog or blockage. Also check the hose for holes or damage they may cause air gaps. If there are no clogs or damage the pump may need to be replaced. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Debra
January 16, 2023
Our dishwasher is draining but the water does not circulate with the other pump. Is this the part we need to replace or is it something else?
For model number WDP370PAHW1
PartSelect logo
Hello Debra, thank you for contacting us. According to our research, the issue is probably related to a faulty pump and motor assembly, part number PS11770231, and not the drain pump. It circulates water through the spray arms during the dishwashing cycle. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Wayne
February 12, 2023
dishwasher leaks
For model number WDT730PAHB0
PartSelect logo
Hello Wayne, thank you writing. Our recommendation is to check the Diverter Valve PS5136127. Diverter motor controls the flow of water to the spray arms. We have a video of how to replace it on our site. We look forward to hearing from you.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Merle
March 6, 2023
I moved my existing dishwasher to a new location in my kitchen and it required a much longer drain hose. After installing the dishwasher the drain pump immediately started leaking. Does the length of the hose create too much pressure on the pump?
For model number ADB1400AGS1
PartSelect logo
Hello Merle, thank you for getting in touch. According to our research, the ideal length for a dishwasher drain hose is about 3 to 4 feet. If the drain hose is too long, it can cause problems with draining and may cause leaking. We would recommend replacing the drain pump, part number PS11738151. We hope this solves your problem!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Nancy
May 3, 2023
FLASHING DRAIN LIGHT. WATER IN BOTTON OF DISH WASHER
For model number WDT730PAh2
PartSelect logo
Hi Nancy, thank you for reaching out. The flashing drain light means that the washer is unable to drain water. To solve this issue, you may need to make sure first that the drain hose is not blocked. If that is not causing the issue, then you may need to check the drain pump, part number PS11738151. If it is faulty, you may need to replace it. We hope this information is useful!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Peter
November 21, 2023
Half of my wash cycles fail to drain and a lot of standing water remains. When I attempt to drain afterwards the machine hums. After a few attempts and about a minute, it makes a grating/grinding noise and then starts to drain. I’ve checked the filter and drain hose numerous times and both appear clean and clear.
For model number WDP350PAAW6
PartSelect logo
Hi Peter, thank you for getting in touch. Based on our research, the most likely cause of this issue is a faulty drain pump, part number PS11738151, which may need to be replaced. We hope this sorts out your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tyler
January 2, 2018
Does this specific part replace or fit the drain pump on the Whirlpool model wdt720padm2 dishwasher?
For model number WDT720PADM2
PartSelect logo
Hello Tyler, Thanks for your question. Yes, this part is the correct part number for your model's drain pump. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Scott
February 2, 2023
Washes but doesnt drain Hose, screen and impeller is Clear
For model number WDT710PAHW1
PartSelect logo
Hello Scott, thank you for contacting us. We would recommend checking the drain pump, part number PS11738151, and the electronic control board, part number PS12704698. The control board manages the draining of the dishwasher while the pump forces the drain water out. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
Ffynnan
February 4, 2023
Unit will not drain after cycle. It just hums and starts to smell like electrical burning. Pulled out the drain pump and tested it. The drain pump appears to work properly outside the unit. If I attempt to drain the unit after resting overnight it will drain with no issues. Is it possible that the drain pump is fine and there’s another part at fault? I’ve already checked all other usual suspects like drain hose and filter. Does the machine’s main motor assembly act on the drain pump at all?
For model number WDF540PADW3
PartSelect logo
Hello Ffynnan, Thank you for your inquiry. The pump and motor assembly (which includes the sump and circulation pump) is for pumping the water through the spray arms during the wash cycle. You can still test it with a multimeter but it usually doesn't act on the drain pump. The electrical burning smell could be coming from the drain pump or a wiring issue. We hope this helps.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738151
Manufacturer Part Number: W10876537
Brand
Model Number
Description
Kenmore
2212413N414
Dishwasher - Kenmore Dishwasher 2212413n414
Kenmore
2213092N413
Dishwasher - Kenmore Dishwasher 2213092n413
Kenmore
2213099N413
Dishwasher - Kenmore Dishwasher 2213099n413
Kenmore
2213222N414
Dishwasher - Kenmore Dishwasher 2213222n414
Kenmore
2213223N414
Dishwasher - Kenmore Dishwasher 2213223n414
Kenmore
2213229N414
Dishwasher - Kenmore Dishwasher 2213229n414
Kenmore
2213479N413
Dishwasher - Kenmore Dishwasher 2213479n413
Kenmore
2213804N710
Dishwasher - Kenmore Dishwasher 2213804n710
Kenmore
2213809N710
Dishwasher - Kenmore Dishwasher 2213809n710
Kenmore
2214523N611
Dishwasher - Kenmore Dishwasher 2214523n611
Kenmore
2214545N711
Dishwasher - Kenmore Dishwasher 2214545n711
Kenmore
2217383N710
Dishwasher - Kenmore Dishwasher 2217383n710
Kenmore
2217389N710
Dishwasher - Kenmore Dishwasher 2217389n710
Kenmore
66512413N412
Dishwasher - DISHWASHER
Kenmore
66512413N413
Dishwasher - Kenmore Dishwasher 66512413n413
Kenmore
66513002N510
Dishwasher - DISHWASHER
Kenmore
66513002N511
Dishwasher - DISHWASHER
Kenmore
66513003N510
Dishwasher - DISHWASHER
Kenmore
66513003N511
Dishwasher - DISHWASHER
Kenmore
66513004N510
Dishwasher - DISHWASHER
Kenmore
66513004N511
Dishwasher - DISHWASHER
Kenmore
66513009N510
Dishwasher - DISHWASHER
Kenmore
66513009N511
Dishwasher - DISHWASHER
Kenmore
66513073K217
Dishwasher - DISHWASHER
Kenmore
66513092N412
Dishwasher - DISHWASHER
Kenmore
66513092N413
Dishwasher - Dishwasher
Kenmore
66513093N412
Dishwasher - DISHWASHER
Kenmore
66513093N413
Dishwasher - Dishwasher
Kenmore
66513099N412
Dishwasher - DISHWASHER
Kenmore
66513202N412
Dishwasher - DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 9pm EST

Contact Customer Service