The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Struggling with a dishwasher that's not cleaning your dishes properly? The issue might lie with your spray arm, a crucial part of your Whirlpool dishwasher's functionality. This top-quality Whirlpool ...
Also know as a diverter valve. This diverter motor is for dishwashers.
Diverter motor controls the flow of water to the spray arms.
Unplug the dishwasher and shut off the water supply before i...
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
$61.18
In Stock
Questions And Answers for 66513092N412
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
February 7, 2025
Dishwasher won't start unless we pull the breaker for 5 to 10 min. Turn breaker back on push start and the dishwasher works. We heard it could be the main circuit board or the sump pump motor. Have you worked with issue before?
For model number 66513092N412
Hi Jim,
Thank you for your question. If the dishwasher will not start, we recommend checking the door latch and the electronic control board. Before removing and checking these parts, unplug the washer from the electrical outlet. If the door is not latching properly, the dishwasher will not start. When inspecting the door latch, check and make sure that the door strike is activating the switch. If it is, test the door switch for continuity with a multimeter on the Rx1 setting to see if it is operating normally. You should receive a reading of zero or nearly zero. If you get any other reading, you will need to replace the door latch. For the electronic control board, inspect it visually for signs of damage, wear, scorching, or burn marks. If it shows any of these signs, it will need to be replaced. We hope this helps!
The display that counts down the time goes blank and there is a box that goes like a marque in a box around where the numbers should be.
For model number 66513092N412
Hello Mary, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11731274 for the Electronic Control Board. We hope this helps.
Washer not heating element test good 13 ohms. What else could it be.
For model number 66513092N412
Hi Ralph,
Thank you for your question. If the heating element tests fine, check the high limit thermostat to see if it has malfunctioned. The high limit thermostat acts as a safety device that keeps the dishwasher from getting too hot. If the thermostat is malfunctioning, it could shut off the heat before your dishes are finished drying. Before removing and testing the high limit thermostat from the dishwasher, please unplug the dishwasher from the electrical outlet. The high limit thermostat will sometimes be found at the bottom of the dishwasher tub, behind the lower access panel. You will need to test the part for continuity with a multimeter. Set your multimeter to Rx1 mode and touch the terminals with the probes. When your thermostat is at room temperature, you should receive a reading of infinity. If you place the thermostat next to a warm lamp, you should receive a reading of zero. If your thermostat produces different results, you will need a replacement high limit thermostat. The part number listed under your model number for the high limit thermostat is PS11743423. If you need to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
My dishwasher will not turn on? I checked the power and that was fine.
For model number 66513092N412
Hello Wendy, thank you for contacting us. According to our research, the dishwasher will not route power to the control panel unless it detects that the door is closed and locked. If the mechanical latch is broken or the microswitches inside the latch have failed, the machine thinks the door is wide open and will remain completely dead. You may need to replace the door latch, part number PS11756967, to fix the issue. We hope this solves your problem!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
My filters had completely clogged up and had not cleaned my filters at all which was a no-no.I had lots of food left on the dishes after running my dishwasher, so I took bothp filters out and replaced them no tools required. I won’t be using powdered or liquid detergent for my dishwasher anymore only pods and promise to clean my filters once a month, so hopefully that’ll help keep them clean. Very easy replacement even for an old woman.
