If your dishwasher isn’t cleaning well, making strange noises, or won’t start, this pump and motor assembly might be the fix. It helps move water through the spray arms so your dishes come out sparkling clean. Made to fit many Whirlpool-family models, it’s easy to install—just unplug the dishwasher and turn off the water before you begin.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore.
Part# W11025157 replaces these:
W10837401, W11184516
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stuart R - April 21, 2021
Verified Purchase
Exactly as described
Be wary you'll have to put the water pump from your old assembly onto this one and make sure that clicks into place other than that everything was great if you're stumped jusg YouTube it
★★★★★
★★★★★
Jeremy M - September 7, 2022
Verified Purchase
Worked as expected.
Good price. Arrived on time in good condition.
★★★★★
★★★★★
Gagan J - May 3, 2023
Verified Purchase
Great part
Good service receive part is short time.
★★★★★
★★★★★
Alan C - August 7, 2021
Verified Purchase
Works great
Easy to replace and works great. It took a little while to get it as it was on back order but after washing by hand for three weeks made us realize how much we appreciate our dishwasher. Dishwasher PODS were the cause of the failure on the original. We will only us liquid or powder detergent from now on- - no more plastic pods !!
★★★★★
★★★★★
Tina P - September 22, 2024
Verified Purchase
It works
It was really hard to get into the machine
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dishwasher would not spray water. It would pump water out and fill just not spray.
I followed the instructions on the Whirlpool site for my model and part (pump and motor assembly). It was a bit hard to get the original assembly out of the dishwasher. They make it look easy but if you look at the dishwasher they are using you will realize that it is brand new. So everything comes apart and goes together smoothly for them. That is not how it happens in reality. I am a woman of average size and had never done any kind of repairs to a dishwasher before. So, it was not easy. I was however able to get it apart and put back together. And now it works!!
Other Parts Used:
Lana from PERRY, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
11 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn’t circulate
-Unplugged the dishwasher. -Removed dish racks, filters and spray arms. -removed drain pump and drain lines. -unplugged turbidity sensor and power connectors. -unlocked the 3 locking connectors, removed the pump and motor assembly. - cleaned every component with soap and water. - applied rinse aid to the motor and pump assembly gasket. -placed pump and motor assembly into the correct position and had a helper hold the assembly down while I locked in the connectors. -work backwards.
Other Parts Used:
Jacob from SAINT AMANT, LA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher filled and emptied water, but would not spray water around during cycle.
Husband is wonderful, tipped dishwasher over on back, disconnected hoses, and drain motor (replaced that a couple years ago), popped out old part, popped in new part. Had me help him keep door open when working from the inside, and flip a plastic holder piece into place on outside. 15 minutes later, I had a dishwasher that worked like new again.
Other Parts Used:
Savannah from DASSEL, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 26, 2019
Dishwasher is filling however no spraying out of the sprayers and it will draining after some time goes on its cleaning cycle.
For model number WDF520PADM7
Hi Brian, thank you for your question. There are a few parts that you should check when you are having this issue. The first parts to check would be your filters and tubing and spray arms. You will want to check that there is absolutely no debris blocking the paths for the water to run smoothly. You may also want to take a look at your water inlet valve as well and make sure enough water is going into the appliance. If those parts are all fine, then the problem might actually be in your Pump and Motor. I hope that helps. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Luis
June 7, 2023
Could you Please clarify what parts are included on the motor and pump assembly part.
For model number WDF520PADM9
Hello Luis, thank you for the question. The pump and motor assembly includes the following parts:
1. Cover, part number PS11755007.
2. Sump, part number PS11755471.
3. Grommet, part number PS11756098.
4. Circulation pump, part number PS16744934.
5. Hose, part number PS3651318.
We hope this information helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lauri
December 27, 2023
Dishwasher fills, sounds like pump is making a noise but nothing then it goes and drains. Is it circulator pump or pump and motor?
For model number WDF330PAHW4
Hello Lauri, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the circulation pump, part number PS16744934, to fix the issue. We hope this solves your problem!
Does the pump #W11025157 have a heater built in, my water is not getting hot?
For model number WDF520PADM7
Hello Matt, Thank you for the question. The Pump does not come with a built in Heater. There is a heater element at the bottom of the tub, PartSelect Number PS8260087. We hope this helps!
Looking for the correct part number to replace the motor pump assembly the serial number of the whirlpool dishwasher is fb5149461
For model number WDF330PAHS5
Hi Jose, thank you for reaching out. The pump and motor assembly for your model is part number PS11770231. We hope that helps!
Was this helpful?
Thank you for voting!
Mark
January 19, 2025
Washer fills with water, heats up a bit, but does not run. It will drain if asked by programming. Panel seems tk allow programming. Left on sensor clean, tried heavy wash, same, fill no run. Problem?
For model number WDT710PAHB1
Hi Mark, thank you for reaching out. Based on our understanding, we would suggest checking the door latch first. If it is fine, the issue could be with the control board, part number PS12704698. It manages the functions of the dishwasher, such as washing, draining and drying. You may need to replace it to fix the issue. We hope this solves your problem!
I bought and installed this part because my dishes weren't coming clean. My spray arms weren't spinning. I of course checked for blocks I even just got new ones. I figured either my water pump was going bad or clogged itself. So I ordered this. I just installed it today and on first run it seems as if spray arms are still in same position as starting position. I opened dishwasher right after it started the 1 hr wash cycle to see that water was coming out and if the spray arms had moved. I could see water was coming from the spray arm on top can't really tell from the bottom but they both are still in the same position and do not appear to be rotating. It has drained once now and I checked again still seems to be in the sane place. I hear water but they just won't spin what else can I do
For model number WDP370PAHB1
Hello Vera, thank you for getting in touch. You will need to replace the circulation pump and motor assembly, part number PS11770231. This is the motor that actually turns the spray arms. We hope this helps.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
