Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Eric C - December 20, 2018
Verified Purchase
Quick and efficient fix
The part came in fast, the fix was easy to do,the part was good quality, very happy of the results, will definitely buy other parts from you when something else breaks
★★★★★
★★★★★
Marlane J - December 3, 2022
Verified Purchase
Switch membrane
Right part and oven working now
★★★★★
★★★★★
JOHN H - August 21, 2020
Verified Purchase
Worked okay for now
Was quick delivery in good shape would order from you again.
★★★★★
★★★★★
PAUL W - October 27, 2021
Verified Purchase
Easy fix!
Really easy to install, had the oven back up and working in less than 30 mins. I should have done this 4 years ago when it started to fail!
★★★★★
★★★★★
TERRY H - July 22, 2020
Verified Purchase
Fast service
Fast service. Range is working perfect.
★★★★★
★★★★★
Sasha H - September 1, 2021
Verified Purchase
Easy repair
Part is easy to install. Quality OEM Part But they are prone to failure because of the membrane design. I have replaced it three times because some of the keypad numbers stopped working . Avoid any range that has a membrane keypad.
★★★★★
★★★★★
Bradley F - December 4, 2021
Verified Purchase
Easy Repair
I was afraid I was going to have to replace the entire oven. Nope! This part fixed it right up!
★★★★★
★★★★★
Donato L - April 15, 2021
Verified Purchase
Quick shipping and exact part needed.
Quick shipping, part was packed well and installed. Process was seamless
★★★★★
★★★★★
Russel S - October 7, 2020
Verified Purchase
Part worked, quick shipping, easy process.
The stove works again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Number touch pad would only work on #4 and #1
First turn off circuit breaker to stove. Slide the stove out about 4 inches from the counter to expose the two phillips head screws, one on the left side and one on the right side of touch panel. Take out screws. Then take out four Phillip head screws on the bottom side of panel, this will set panel loose from stove. Carefully pull up touch pad (switch membrane) from control panel; it is sticky glued in place. Disconnect ribbon cables on switch membrane from control panel by depressing cable locks while pulling firmly. Remove switch membrane. Clean area before installing new membrane. Reassemble turn on power and you are done.
Other Parts Used:
Ken from Cedar City, UT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
83 of 97 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch membrane oven controls not working.
Watched first warranty repair tech preform first costly replacement by removing 8 panel screws on face of oven. Same malfunction twice in last 4 years. The second and third replacement I did myself with just my trusty screw driver. Tip: Keep order receipt handy for easy reorders.
Other Parts Used:
Scottie from RIVERDALE, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touch pad for oven stopped responding properly
Easy repair for anyone! First, cut the power to your stove to be safe (breaker switch in the fuse panel). -Pull the stove out so you can get to the sides. There is a screw on either side, near the top of the side, and front. Unscrew both. -Remove the 2 screws on the top panel, and 4 screws underneath the front lip. -The front panel is now free. Peel off the old sticky touch pad, unplug the two ribbon connectors (push in on the locks on the sides of the plug-in), and set aside. -Thoroughly clean the surface , removing all sticky residue. -Plug the new pad in, peel back the sticky protective paper, and carefully align the new pad, pressing it firmly into place when lined up properly. - Set the panel in place, replace all screws, push the stove into place, turn on the power and bake a cake!
Other Parts Used:
Rand from S DARTMOUTH, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
October 16, 2017
None of the numbers work on the touch pad, but the other features do on the same touch pad. Do you think it is this part?
For model number GW397LXUB05
Hi Randy, Thank you for the question. I suggest taking the panel apart to check the electrical ribbon. Sometimes they get a build up and need to the cleaned. Try to clean the connectors with a Q-Tip and make sure the ribbon did not come lose. If this does not fix the issue the Membrane might need to be replaced.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
July 24, 2019
No power to front display
For model number Gw397lxus06
Hello Mike, thank you for contacting us. You will want to replace the Electronic Control Board part number PS11749641 for your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Elaine
July 27, 2021
When I search for model the model number is not recognized?
For model number GY399LXUB2
Hello Elaine, Thank you for the question. The Model number GY399LXUB2 is the same as GY399LXUB02. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Crys
October 21, 2019
How can I test to ensure the new membrane works before removing the sticky back? Like others my buttons stopped working, I was down to just a couple working so I purchased the membrane part. I’ve got the stove disassembled but hate to get locked in to this if it is actually the control board.
For model number GW397LXUS06
Hi Crys,
Thank you for your question. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jody
July 15, 2021
Hi. All of the black panel buttons work and heat up, stove top and broil except the bake button. What should we trouble shoot and what part should we buy if cleaning it doesn't work?
For model number GY397LXUS02
Hello Jody, Thank you for the question. This is an indication the Switch Membrane - Black is defective and will need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kristie
November 28, 2022
We replaced the panel about a year ago. This did not help with the stove heating to over 500 degrees no matter what it was set at. We already replaced the thermostat and the thermal fuse. Now the panel doesn't work at all and starts to beep by itself for no reason. I have been using my wall oven and the range top to get by, but the beeping is getting on everyone's nerves. Thought I would get a new thermostat but with the panel not working, do I buy a new panel too?
For model number GY397LXUS02
Hello Kristie, thank you for reaching out. If your panel is beeping and not working, we suggest that you check the membrane, part number PS11750390, and the electronic control board, part number PS11746002. If you require assistance to place an order, please contact customer service. We hope that helps!
Hi Mhlefebvre,
Thank you for your question. The electronic control board, part number W11335275, is currently in stock and the current cost for it is $1220.17. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. If you have any questions, please let us know
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Range-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"WPW10207928","title":"WPW10207928","url":""}]
