Have a problem with your washing machine door popping open during cycle? We understand how frustrating this can be! The solution is right here with our genuine Whirlpool Door Lock Assembly - designed to keep your machine's door securely locked during the wash or spin cycle. Why is this crucial? Well, not only does it boost your washer's safety, but it also ensures your laundry process isn't interrupted at all - providing smooth, efficient cleaning. And let's not forget the potential water mess a door popping open could bring! This door latch was designed with you in mind. Tailored by Whirlpool, it's guaranteed to work seamlessly with certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef washing machines. But before you get too excited, do make sure to double-check that this door lock assembly is compatible with your washer model. We want your washer to get back to its optimum performance without a hitch. Don't worry about a stressful installation either. We provide detailed, easy-to-follow instructions. All you'll need is a pair of work gloves and you can effortlessly maneuver through the process. Take a step towards a safer and more effective laundry routine with our Whirlpool Door Lock Assembly. You won't just be getting a lock; you'll be securing peace of mind for every laundry load you run.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Part# WPW10192995 replaces these:
AP6016671, W10192995
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Michael F - June 22, 2021
Verified Purchase
simple fix
Worked great, 2 minute install once liner pulled back and top ( 1 screw) removed
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Code F26 was displayed
I removed the rubber gasket, unscrewed the door latch, and removed from behind the gasket. It’s easily accessible from the front for removal and installation. However, it ran for two cycles normally, then displayed the code again.
Other Parts Used:
Brigham from Throckmorton, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
July 23, 2019
This machine will not start.
For model number WFC7500VW2
Hello Mike, thank you for your question. The most common reason a unit that won't start is the latch. We would recommend testing the part to determine if it has failed, and if so it will need to be replaced. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Gary Kidwell
January 15, 2019
Door locks but door lock light flashes and will not fill
For model number WFC7500VW2
Hi Gary,
Thank you for your question. According to the owner's manual for your washer, when the Door Locked LED light illuminates, the door is locked.
The door is locked and unlocked automatically, depending on the
stage of the wash cycle. Press and hold CANCEL/DRAIN for
3 seconds to unlock the door manually. It will take approximately
1 minute for the door to unlock. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
January 20, 2020
My washer is not going into a high spin. Should I replace the door lock assembly. Do you have the part number?
For model number WFC7500VW2
Hello Lisa, Thank you for the question. If the Tub is not spinning at all then we woudl suggest test Lid Lock. If the tub is spinning but not at the correct Speed, the Lid Lock is fine. This could be an issue with the Drive Motor, PartSelect Number PS11749959. We hope this helps.
The machine starts sporadically. Lights flash etc but it does not fill with water. Sometimes it takes 4-5 tries. Once it starts it works fine.
For model number MHWC7500YW
Hello John,
Thank you for your question. Our sources suggest replacing the electronic control board under part PS11749949 for your model to fix the washers issues. We hope this helps.
Washer does not always sense the door is closed. I have to push hard on the door, on area where the spring-sensor sits behind the door. Which part would you recommend needs replacing?
For model number WFC7500VW1
Hello Kevin, thank you for your inquiry! Our research indicates that the issue is probably with the Door Lock Assembly, part number PS11749964. If that is not the problem or if you have already fixed that, then the problem would be related to the Door Switch, part number PS11749963. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Hello,
The error code F 13 comes on the display after performing a diagnostic test. Per manual it indicates a door lock/switch problem. It would lock at first when I close the door, then i hear a click and it proceeds to unlock OR before I would have to reopen the door and slam it for it to lock and fill. What do you suggest ?
For model number maytag washer mhwc7500yw0
Hello Rosie, thank you for contacting us. The f13 error code indicates a door lock failure. We would recommend replacing the door lock assembly, part number PS11749964, to fix the issue. It prevents the washer door from opening during the wash cycle or spin cycle. We hope this solves your problem!
Struggling with a malfunctioning washing machine door? Worry no more! The Whirlpool Washer Door Lock Switch is here to solve your problem. This switch is more than just a component; it's the key to ensuring your washing ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
