This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dale
February 18, 2020
What would cause the problem when the machine will not spin fast...it does spin slowly like it should but not fast as in the end of the wash cycle..
For model number WFC7500VW0
Hello and thank you for writing.
It certainly sounds like it could be a faulty Belt PS11740785 and/or possibly a faulty pulley PS373050
you should check the part(s) for signs of damage and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
I bought this washer used and the legs were extremely bent and only had two on it.. i can’t find replacements anywhere.
For model number WFC7500VW0
Hello Marissa, thank you for your question. The leveling legs for this unit are Part #: PS11749952. Please enter the part number into the site for current price and availability. Good luck with your repair!
The Start button of my washer if broken and stuck inside the unit. Can this be replaced? I cant find the part anywhere.
For model number WFC7500VW0
Hi Tas, thank you for reaching out. Based on our research, the start button is not sold separately, you may need to replace the whole console panel, part number PS11749953, to fix the issue. We hope this information is useful!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Removed braces, then removed belt. Started the belt on, then when I got to a point that I couldn't turn it any more I put the cable tie over belt and wheel,tighten them as tight as I could. When the belt got about on I watched close if you don't it will come off going around motor.