This drain pump is for dishwashers.
Drain pump removes the water from the dishwasher tub during the drain phase of the dishwashing cycle.
Unplug the dishwasher and shut off the water supply before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not draining | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Amana, KitchenAid.
Part# W10876537 replaces these:
AP6004843, W10724439, W10876537VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
MARK V - February 15, 2024
Verified Purchase
Double check
Part fitt works well didn’t need it though found popcorn kernels in old pump
★★★★★
★★★★★
Andrew C - April 5, 2023
Verified Purchase
Easy repair
Part came in fast. Took 5 minutes to change out. Works great.
★★★★★
★★★★★
Gary R - August 5, 2020
Verified Purchase
24 hours in my hands. 5 min to install. Exact info.
Dishwasher fully operational!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dish washer would not drain properly
Shut off breaker. Took off front skirt of dishwasher . Used pliers to loosen the pressure clamp on drain pump , have towel handy as there will be some water. Turn pump to left as you push in on the clip on side of drain pump. It will come out. Remove wire plug from old pump and plug into new pump than insert new pump and turn and push in till it clicks. Use pliers to pinch hose clamp and push hose onto pump release hose clamp. Turn breaker on. Run a cycle and make sure all is tight before putting skirt on front.
Other Parts Used:
Kelli from BURLINGTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain pump Plastic impeller broke inside
Located drain pump under dishwasher disconnected electrical from wall and pump twisted pump to remove, and installed new pump. Great customer service from Parts Select, helped to make sure i was ordering the correct part.
Other Parts Used:
Hector from RCH CUCAMONGA, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not draining
Very easy to twist off the old pump and replace with new part. Worked perfect after replacement! We just followed you tube instructions
Other Parts Used:
Tina from BLOOMINGTON, IN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Was not draining, did not hear motor
Installed new pump from the front. Power off remove front cover reached my hand behind pump for release clip, push down turned counter clockwise pump comes out. Disconnected electrical plug attached plug to new pump. Put pump in at 45 degrees rotated clockwise until hear clip lock in . Tested then replaced cover
Other Parts Used:
KEVIN from BEL AIR, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher didn't drain.
Replaced the pump.That wasn't the problem --- if I had it to start over, I'd pull the drain hoses and run the dishwasher to see what water is flowing where. I had a clogged drain --- and maybe something else. Still working through the details.
Other Parts Used:
Bart from Ellicott City, MD
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nancy
January 16, 2019
When dishwasher should go to drain cycle, it hums and then powers off. Hose and filter are clear.
For model number KDTE104ESS
Hi Nancy,
Thank you for your question. If the dishwasher is not draining and you are hearing humming sound and then it shuts off, the issue could could be the motor or there is debris in the impellers, you will need to inspect the motor to verify the cause. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Chad
April 2, 2018
It will not drain, it would not push any water through the hoses but if you take the hose a loose play me a water comes out. I flush the hoses with them little packs that you clean it with.
For model number ADB1300AFW1
Hi Chad, Thank you for the question. I suggest checking the drain pump for a clog or blockage. Also check the hose for holes or damage they may cause air gaps. If there are no clogs or damage the pump may need to be replaced. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Debra
January 16, 2023
Our dishwasher is draining but the water does not circulate with the other pump. Is this the part we need to replace or is it something else?
For model number WDP370PAHW1
Hello Debra, thank you for contacting us. According to our research, the issue is probably related to a faulty pump and motor assembly, part number PS11770231, and not the drain pump. It circulates water through the spray arms during the dishwashing cycle. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Does this specific part replace or fit the drain pump on the Whirlpool model wdt720padm2 dishwasher?
For model number WDT720PADM2
Hello Tyler,
Thanks for your question. Yes, this part is the correct part number for your model's drain pump.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Merle
March 6, 2023
I moved my existing dishwasher to a new location in my kitchen and it required a much longer drain hose. After installing the dishwasher the drain pump immediately started leaking. Does the length of the hose create too much pressure on the pump?
For model number ADB1400AGS1
Hello Merle, thank you for getting in touch. According to our research, the ideal length for a dishwasher drain hose is about 3 to 4 feet. If the drain hose is too long, it can cause problems with draining and may cause leaking. We would recommend replacing the drain pump, part number PS11738151. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Wayne
February 12, 2023
dishwasher leaks
For model number WDT730PAHB0
Hello Wayne, thank you writing. Our recommendation is to check the Diverter Valve PS5136127. Diverter motor controls the flow of water to the spray arms. We have a video of how to replace it on our site. We look forward to hearing from you.
Half of my wash cycles fail to drain and a lot of standing water remains. When I attempt to drain afterwards the machine hums. After a few attempts and about a minute, it makes a grating/grinding noise and then starts to drain. I’ve checked the filter and drain hose numerous times and both appear clean and clear.
For model number WDP350PAAW6
Hi Peter, thank you for getting in touch. Based on our research, the most likely cause of this issue is a faulty drain pump, part number PS11738151, which may need to be replaced. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
February 18, 2023
Dishwasher runs through cycle but water remains when finished. Hose and air gap clear. Drain pump impeller appears ok and pump tests normally for continuity, but does “click” when activated. Does this sound like a pump issue or a control board problem?
For model number WDT720PADM2
Hi Michael, thank you for contacting us. A little water left over after a cycle is normal. It keeps the seals from drying up and your dishwasher will pump it out immediately before you start a new load. However, if there is more water, we recommend checking the dishwasher filter, part number PS11759673. If this does not fix the issue, you may need to replace the control board, part number PS12745387. We hope this helps!
Dishwasher drains but has standing water below filter after full cycle causing a rotten egg smell. Drain line is clear.
For model number WDF520PADM7
Hello Bryan, thank you for contacting us. It is normal for there to be a small amount of standing water in the dishwasher filter area. You may notice this water when you remove your dishwasher filters for regular cleaning. This small amount of water is drained when you start your next cycle and is replaced with fresh water. The smell might be due to a dirty drain filter. You may need to clean or replace the drain filter, part number PS11759673. We hope this helps.
FLASHING DRAIN LIGHT. WATER IN BOTTON OF DISH WASHER
For model number WDT730PAh2
Hi Nancy, thank you for reaching out. The flashing drain light means that the washer is unable to drain water. To solve this issue, you may need to make sure first that the drain hose is not blocked. If that is not causing the issue, then you may need to check the drain pump, part number PS11738151. If it is faulty, you may need to replace it. We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
