Average Repair Rating: 4.0 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not spin properly, belt was worn
Took off belt/motor housing and replaced belt. Put housing back on. Very easy.
Other Parts Used:
Robin from MOUNT VERNON, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water pump replacement
went online to replace water pump on washer site and followed directions. Very easy installment.
Other Parts Used:
Vikki from CORDOVA, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer would make noise when it was spinning and sometime it would not spin out
I contacted parts select and entered washer information and asked them if they thought they would now what the problem was and and they responded with a answer and also a list of two parts that they thought might take care of the problem. I ordered the parts,looked on u tube to see how to change them and replaced both parts .I think the clutch was good but the drive belt was stretched and needed replaced.Know it works great.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 28, 2022
Washer doesn't seem to be spinning all the water out of clothes any ideas. I'm wondering if belt is stretched and slipping
For model number GTW465ASN0WW
Hello Robert, Thank you for your inquiry. You can check the belt and pulley for any visible damage. We would also recommend checking the speed sensor, the mode shifter, the clutch, and the drive motor. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
December 17, 2017
The light panel lights up, it sounds like it is going to start but nothing happens. Do you have any advice?
For model number GTW485ASJ
Hello Linda,
Thanks for your question. You may want to start by testing the door strike and door lock for continuity with a multi-meter. If they are not showing continuity, consider replacing them. These parts can prevent the washer from operating if they are faulty.
I hope this helps.
Hi Prem, thank you for your question. Unfortunately we do not have any installation information for your model specifically. However we do have a general video on how these parts are installed. So you should be able to use this video to help you with your own installation: https://www.youtube.com/watch?v=9qpUhb1zBYs . Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
George
December 22, 2022
The picture I see of the belt looks to big.my drive belt is small is this one
For model number GTW465ASN0WW
Hello George, thank you for your inquiry. According to our research, this belt will fit your model. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Frederique
March 3, 2023
Hi! I need to order a new drive belt for my washer but my model number doesn't seem to exist... What should I do?
For model number GTW680BMM0WS
Hello Frederique, Thank you for contacting us. Researching the model number that you have provided, we show the compatible drive belt as part# PS12074047. We hope this helps you.
