Part Location Diagram of W10775188 Whirlpool Washer Washplate
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

customerservice@partselect.ca

Washer Washplate W10775188

Rated by 3 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$134.52
  Special Order

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11699797
Manufacturer Part Number W10775188
Manufactured by Whirlpool
Product Description

Washer Washplate Specifications

This washplate is for washers and turns back and forth at the bottom of the spin basket to circulate the wash load through the water.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# W10775188 replaces these:
AP5959417, W10698538, W10834891
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 3 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Replaced washer plate and screw
Used a pocket knife to remove the cap covering the washer plate screw. Used socket wrench to remove the screw. It required some torque to remove, and it was necessary to hold the tub to prevent it from spinning while the screw was being loosened. Don't order the wash plate screw separately. The wash plate came with a screw.
Other Parts Used:
Washer Washplate Screw
  • MICHAEL from GAINESVILLE, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spines on the washer plate were worn and allowed the plate to spin freely
Removed old washer plate with 7/16 socket, holding the drum so I could loosen nut. Thought I would have to replace spanner nut, but did not need to. Put new washer plate on and tightened the bolt holding the drum at the same time
Other Parts Used:
  • James from LAKE JACKSON, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer plate wasn’t agitating
Removed cap with flat head. Screw stubborn used impact drill to remove. Cleaned washer tub after removal. Put new one in. Excellent quality. New screw which was included in my order. 7/16 ratchet to tighten. Replaced cap. Good as new
Other Parts Used:
  • Susan from CLARKSTON, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11699797
Manufacturer Part Number: W10775188
Brand
Model Number
Description
Whirlpool
WTW7040DW0
Washer - AUTOMATIC WASHER
Whirlpool
WTW7040DW1
Washer - AUTOMATIC WASHER
Whirlpool
WTW7040DW2
Washer
Whirlpool
WTW8040DW0
Washer - WASHER
Whirlpool
WTW8040DW1
Washer - WASHER
Whirlpool
WTW8040DW2
Washer - WASHER
Whirlpool
WTW8040DW3
Washer
Whirlpool
WTW8040DW4
Washer
Customer Service Representative

Get in touch, we're here to help!

1-866-883-8386 Monday to Saturday
8am - 8pm EST

Contact Customer Service