This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This lid hinge is a genuine OEM replacement part for your washing machine. This hinge is for the left side of your lid, although it is a good idea to replace btoh hinges at once. The hinge holds up th...
Washing Machine Drain Hose Extension Kit *4 foot - includes hose, 2 clamps and hose connector.
$47.00
In Stock
Questions And Answers for WTW8040DW3
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
March 9, 2020
A penny dropped under the center agitator. Will it cause any problems?
For model number WTW8040DW3
Hello Joan, thank you for your question. No, that one penny should not cause issues. If you notice a noise, or grinding then we would recommend removing the agitator and getting that penny out of there. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Renee
August 21, 2023
when in diagnostic mode, the codes E5 and F7 show. What do they mean?
For model number WTW8040DW3
Hi Renee, thank you for the question. According to our research, the E5 and F7 error code is a shifter fault error code. It means the main board has detected a shifter failure. This happens when the shifter is not engaging or disengaging in wash or spin mode. We recommend checking the clutch, part number PS10064562, to fix the issue. It spins the basket during the spin cycle. We hope that helps!
Where is the drain pump filter located? There is no panel on the front of the washer
For model number WTW8040DW3
Hello Julie, thank you for your question. We have a video for the Drain Pump PS11738156 for you to view for installation information. We hope to hear from you soon.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
This is a very simple repair. My lid was severely cracked on the back left corner where there seems to be a lot of pressure/torque required to shut the lid. There is a metal L-shaped "tab" that inserts into the lid on both sides of the back edge of the lid. The lid is attached to these metal tabs with two screws for each side. My cracked lid had resulted in the lid breaking off of the metal tab with the screws still anchored into the metal tab.
Make sure screws have been removed from the metal tabs on both sides. Do not remove metal tabs- leave them attached to the washing maching (otherwise, you will not be able to attach the lid back onto the machine). Slide the lid over the tabs. There are square-shaped spaces along the edge of the lid where the tabs slide into the lid. Re-screw the screws into the lid, attaching the lid to the tabs through pre-drilled holes on the sides of the lid. It may take a little time to make sure the screws are properly inserted into the lid and tab screw holes. Tighten up and you're finished.
