This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged,...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julius
January 19, 2020
Leaks when filling so I assume it the fill valve. How do I remove the console so I can access the valve?
For model number WTW7040DW1
Hello and thank you for writing.
The water inlet valve is PS12349461.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair
https://www.youtube.com/watch?v=brNAnxKEsrk
The washer makes a squeaking noise when it is in the wash or rinse cycle. Not when it is in the spin cycle. Seems to be cleaning fine just noisy.
For model number WTW7040DW1
Hello Charlotte, thank you for the question. Based on our understanding of the issue, we would suggest you checking the gearcase, part number PS12741641, to fix the issue. Glad to be of assistance!
We are getting a code "int" on the screen. I have not been able to find that error code anywhere. When we turn it on all the buttons work, we start it, it latches, but does not fill up with water. You can hear a faint sound of something running or trying to run. But it will do that for about 3 or 4 minutes then buzz like its done.
For model number WTW7040DW1
Hello Cole, Thank you for the question. The "int" means interrupt. The "int" will display when "Stop" is pressed when trying to interrupt the cycle. Normally it should start again after 3-5 seconds after pressing "Start". If the "Stop" Was not pressed or it will not start again, we suggest checking the wiring connections between the boards. We hope this helps!
Was this helpful?
Thank you for voting!
Dimetria
November 2, 2021
What does it mean when the code LF comes up on the screen?
For model number WTW7040DW1
Hello Dimetria, Thank you for the question. The LF Error code indicates an issue with the water flowing into the appliance. We suggest checking the screens on the Water Inlet Valve where the Water Fill Hoses connect. If they are clear, you may have a defective Valve. We hope this helps!
We are getting a code f5 and e2, the machine wont advance
For model number WTW7040DW1
Hello Pamela, Thank you for the question. The F5 E2 error code indicates the washer can't engage the lid lock because there may be an obstruction in the lid lock area or the lock is faulty and needs to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Removed two screws on back of lid to raise top removed tub one bolt and one spanernut pulled tub lowered top reinstalled screws laid washer down to get to bottom of washer unplugged wiring removed four bolts pulled gear box and motor removed motor from gear box installed motor on new gear box reassemble washer