This washplate is for washers and turns back and forth at the bottom of the spin basket to circulate the wash load through the water.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool.
Part# W10752283 replaces these:
AP5956378, W10609476, W10752283VP, W10834890
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
5 Stars
8
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carol P - December 2, 2022
Verified Purchase
Quick easy repair
The part fit the machine exactly and the machine is back working well. It was very easy to install. The part was shipped quickly but was delayed a couple of days in transit.
★★★★★
★★★★★
Elaine M - September 28, 2021
Verified Purchase
Easy repair
The new part looks to be more durable than the original and arrived within one week
★★★★★
★★★★★
Barbara C - May 15, 2021
Verified Purchase
right part
was able to complete the repair of the right part after watching the suggested youtube to actually find out what was really wrong with the washer and why the cloths weren't clean !!.
★★★★★
★★★★★
Erika B - May 26, 2020
Verified Purchase
Got it Quickly during Covid19 Pandemic
The part was received within 3 days of ordering it online. Shipped the same day Monday and received Wed. Thankful as I can't go without washing since my husband is an Essential Worker (Transport Driver), plus I want to make sure everything is clean during this time! The part is exactly as I ordered and even came with a new bolt! Some places don't offer that! Plus they are a Canadian Company! Especially now, I want to buy as much of Canadian Made Products. PartSelect also has support/parts, etc. Everything you need to do repair by yourself! I had warranty thru Kenmore who left Canada and department store took over. Would have cost me over $500.00 for them to come out (who knew when-lockdown) and would have had to order part anyways. Anyone can do it, if I can! Highly recommend!?
★★★★★
★★★★★
Susan L - December 11, 2019
Verified Purchase
It was very easy to replace - took the cap off and the bolt out and the old one pulled out and the other fit over, reinstalled screw and cap and were ready to go.
I was very pleased with the delivery service - ordered it one day and it was here the next day. Put it on that night and there was hardly any down time st all.
★★★★★
★★★★★
Albert B - May 23, 2019
Verified Purchase
great
great
★★★★★
★★★★★
Ivanka K - April 9, 2019
Verified Purchase
Easy Repair
Thanks to you tube, I was able to diagnose the problem, got the part in 2 days. Husband fixed it under 5 minutes. No need to call in a service technician.
★★★★★
★★★★★
Bruce L - January 4, 2019
Verified Purchase
Next Day Delivery . . . exact part that was required
Washing machine broke down on Thursday, part was delivered on Friday, I installed it on Saturday in a few minutes. The machine is back up and working. PartSelect is the first place I go to when I have problems with an appliance. The troubleshooting guides have always led me to the correct fix and parts needed.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer plate replacement
As women, myself and my daughter completed this fairly simple repair. The replacement washer plate was top quality and included the washplate replacement screw. Additionally, we purchased a tube of lock tight to further secure bolt placement. The most difficult part of the repair is to disengage old screw and securely replace with new one. Very pleased with fast delivery Excellent customer service and top quality part. Thanks
The washing machine tub wouldn't spin dry. I could hear some grinding when it was supposed to start spinning.
I knew the hub was probably the issue. I also knew it could be difficult to remove the wash plate, as I tried to do it before on another model a few years ago. When I took out the wash plate bolt, and made the decision to carefully smash the wash plate with a hammer and remove it piece by piece, it was very simple to get to the hub and remove it with a screwdriver. The new wash plate and hub took about 10 minutes to put back in.
Ask our experts a question about this part and we'll get back to you as soon as possible!
20 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Antonio
October 10, 2017
Could I use any other part number that fits w10609476 Whirlpool washer plate
For model number WTW5000DW0
Hi Antonio,
Thank you for your question. The original part number that you have there has been discontinued and replaced with this part. This would be the part that replaces the number you have and it is the correct replacement for your model. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
February 21, 2018
I noticed that a few dimes and a penny have slipped down and are between the wash plate and the outer ring. I am worried that they might work themselves down into the water discharge system. My question is, can I remove the bolt that is holding the washplate plastic inner ring and lift out the ring to get the coins. I cannot seem to find any information on this. Thank you for your assistance.
For model number WTW7300DW0
Hi Kenneth, Thank you for the question. Yes, you will need to remove the bolt to lift the washplate and ring out to separate them and remove the coins. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Leonard
March 5, 2020
Is it possible for the wash plate to be gauled to the shaft? I cannot get it off.
For model number wtw5000dw1
Hello Leonard, Thank you for the question. The Washplates are not glued but may take a bit of force and there is a bolt at the top that will need to be removed. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Elizabeth
December 19, 2018
My clothes are not getting washed, if i replaced wash plate will this help??
For model number WTW5000DW0
Hello Elizabeth, thank you for your question. It depends on what the issue is. If the washplate is broken it should be replaced. If the shaft that agitates the wash plate isn't moving the issue could be the Part Number: PS6012095 Drive hub kit, Part Number: PS11773169 gear case, Part Number: PS11747978 Drive Belt, Part Number: PS10057144 drive pulley. We would recommend checking those parts before replacing just the washplate. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Keena
August 7, 2018
How do i know if the washer plate is slipping is cause by the threaded gear in the washer plate or the gear it sits on ?
For model number W10752283 Washer plate #
Hi Keena,
Thank you for your question. It sounds like the bolt that secures it may not be secured correctly or the issue could be with the housing. I would check both of these items to see which one is causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
March 13, 2020
Is this part number the same as w10752283
For model number PS10064549
Hello Kenneth, thank you for your question. Yes, those parts are exactly the same part, just different reference numbers. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
September 14, 2017
Is this part for my model?
For model number WTW5000DW1 and Serial: C60244526
Hi Joe,
Thank you for your question. This is the correct part for your appliance. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kayla
November 9, 2019
Why will my washer stop working once it gets to the rinse and spin cycles? What could be the problem?
For model number WTW5000DW2
Hello Kayla, Thank you for the question. I suggest testing the Washing Machine Door Lock Assembly, PartSelect Number PS12704713. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning. Hope this helps!
My washplate bolt keeps loosening after we tighten it and we were told that the washplate is stripped. If we order another washplate will that fix the problem most likely?
For model number WTW5000DW1
Hi Lisa, Thank you for the question. Yes if the plate is stripped it will need to be replaced in order to fix the issue. hope this helps!
Was this helpful?
Thank you for voting!
Shirley
January 21, 2019
Original Whirlpool part. Not refurbished?
For model number W10609476
Hello Shirley, Thank you for the question. All the parts we sell are Brand new OEM parts. Never used, refurbished or after market. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
