This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This part is used to extend washing machine drain hose approximately 4 feet. You may also require the connector (PartSelect Number PS334663) to connect the extension to the existing drain hose.
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Martha
March 7, 2023
My machine washer cycle stopped check connection no water going in.but I can restart cycle it will wash but quits and msg said check waterline
For model number WTW6120HW0
Hi Martha, thank you for reaching out. According to our research, first, check the hose for clogging. If clogged, clean it. If still there is the same issue, you may need to check the following parts: the water inlet valve, part number PS12349461, and the control panel assembly, PS16221056. We hope this helps!
Washer makes a loud screeching noise when it starts up and sometimes when it goes into the spin cycle. Wondering if it's belt. If so which belt would I need to replace? Would like to have it when we investigate the issue incase it needs replaced.
For model number WTW6120HW0
Hello Cheryl, thank you for reaching out. Based on the description that you have provided, we would recommend checking the drive belt, part number PS12578772, to fix the issue. When the belt is loose or damaged, it can cause a loud screeching noise. We hope this solves your problem!
washer fills slow on cold water throws code for not enough water. Water into washer has pressure.
For model number WTW6120HW0
Hi Larry, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the water inlet hoses for clogging. If this is not the issue, we suggest replacing the water inlet valve, part number PS12349461, to solve the problem. We hope this solves your problem!
there seems tto be a gap inside my washer now between the top and the drum about 3-4 inches that was never there before and now my washer makes a squealing noise at start up and during spin cycle. could it be a belt or the suspension?
For model number WTW6120HW0
Hello Theresa, thank you for contacting us. Based on the description that you have provided, we would recommend checking the suspension rod kit, part number PS12731176, to solve the problem. We hope this helps!
Hello Paul, Thank you for your inquiry. We show that there is a drain pump filter between the basket and outer tub assembly part# PS16660526, and a noise filter in the top of the cabinet, part# PS16744969. We hope this helps.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.