TS518SW-P1183701W Amana Refrigerator - Instructions

Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.

I ordered the post, pulled it out of the box, pulled off the glass, pulled out the drawers. I looked at where the post looked like it shoul go and put it in. put the drawers in, glass on. It took me about 5 minutes and everything is perfect.

bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what is inside the refer!

I took the glass shelf out of box and slid it right in. It took a matter of 5 seconds to put it in and it fits like it was never replaced.

I removed three screws each on the old handles & removed the handles.
I reversed the process by attaching the new handles using the old screws.
All looks great.

I removed the old door handle with a screwdriver and simply replaced it with the new door handle. I put the "Amana" name plate from the old door handle into the new one. Took less than 15 minutes. Very, very pleased. Plus the ivory color matches pretty well with a refrigerator that is more than 15 years "young". :)

Replace immediately with new shelf from PartSelect.com!

I simply put the post in and set up the drawers and shelf.

With this order it wasn't so much the repair that was the issue but the fact that I needed the part right away. I broke the shelf Tuesday night and placed the order just afterwards. By Thursday afternoon I had received the new shelf; one day before my inlaws arrived to visit. I was surprised and relieved the part was in stock. Thanks!

Removed the plastic cover cap on side screw the removed the three screws, removing the old handle. Cleaned screws and mounting area on door, then installed the new handle. Very easy.

We replaced the shelf with no tools. Just slid it into place. Literally took 15 seconds.

First I couldn't get it back..due to eye problems so i gave it to my husband and he just did it in a flash..you set it under the glass and put the drawers or crispers back in and its done.

I was really worried about finding a glass to fit the shelf, and then I discovered Parts Select. Using the model number on the back of the refrigerator, I was searched Parts Select to find the right part. It arrived very quickly, was very easy to install, and fit perfectly! Thank you!

Initially replaced the shelf with clear plastic. Then, after some time, decided to "do it right" and use glass. Found PartSelect by surfing the Internet and was elated to find the exact part needed rather than having to have glass custom cut. The glass shelf arrived quickly, was packed very well, and was simply installed. We were very happy to find this solution.

Eased the putty knife under the edge of the switch housing and pried it off. Pulled two wires off the old terminals and hooked them onto the new one and reinstalled into the refrigerator body.