RN175C Porter Cable Nailer - Overview
Models starting with RN175C
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
SPRING-FEED PAWL
PartSelect #: PS12397982
Manufacturer #: 149859
This is a genuine OEM replacement spring, sold individually and designed for use with select roofing nailers. This spring is mounted to the pawl and plays a crucial role in the firing mechanism. After...
$7.44
In Stock
O-RING-1.862X.103 NB
PartSelect #: PS12400658
Manufacturer #: 149829
A genuine OEM sourced item which is supplied for use with Bostitch nailers. This replacement o-ring is utilized to provide an air-tight seal for the sleeve, please refer to the appropriate diagram of ...
$7.44
Special Order
PIN-SPIRAL M3X30
PartSelect #: PS12411780
Manufacturer #: 100298
It is a genuine manufacturer-supplied component which is made for Bostitch nailers and staplers. This is a special spiral pin that is utilized to secure the trigger. It is an identical replacement for...
$7.44
In Stock
RETAINING RING-INCH
PartSelect #: PS12414503
Manufacturer #: 149854
This authentic part is sourced directly from the original equipment manufacturer for use with Bostitch pneumatic roofing nailers. The purpose of a retaining ring is to secure a component on a shaft. I...
$7.44
Special Order
SPRING-DEPTH ADJUST
PartSelect #: PS12414504
Manufacturer #: 149874
This is an authentic OEM component from Bostitch. The depth adjust cam spring is compatible with several pneumatic nailer devices. Fitted between the trip assembly and the lower contact arm, providing...
$7.44
Special Order
O-RING-.299X.103 NBR
PartSelect #: PS12419913
Manufacturer #: 149883
This is an authentic manufacturer sourced replacement part designed for use with Bostitch nailers. It helps to create an air tight seal for the nose assembly, for correct application make sure to chec...
$7.44
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
10 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!