PFSS6PKXCSS General Electric Refrigerator - Instructions

with my hands

it was easy. Open the fridge,untwist the old filter. Open the new filter, fill with tap water and twist in place. Run water through it for a few minutes to insure it is working and filters the water.

Removed clear cover from old frame with screwdriver and replaced it on new frame. I had no problems and everything looks and works good. Took about 10 minutes. Easy job.

I watched the video, and noticed that they did not even turn off the water. The replacement took less than 30 seconds once the filter was filled with water.

Replaced Water Filter (twist off old filter; twist on new.)

easy easy easy!!!!!

after receiving spring installed spring in seconds. Thanks partselect.com Ryan Cappell

Simply twisted off the old water filter, unwrapped the new one and twisted it on.

replaced the filter with the new one i purchased

replaced door and window. Snapped in place

pushed new spring in.

Very simple, I followed instructions sent with the filter. Twisted old filter clockwise 1/4 turn to remove. Filled new filter with water, lined up arrow on filter to arrow on refrigerator, and then turned 1/4 turn counterclockwise. Filter raised and seated itself. Wiped few drops of water from refrigerator shelf.

unscrew filter and replace the new one

Very easy ,new unit has rollers instead of all plastic sides,just pop- it in, now works better than original.

Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.