JFC2290REM05 Jenn-Air Refrigerator - Instructions

Looked at the appliance's booklet to see how it fit together, then installed it.

My husband and I did this together. Most of the time was taking out all the food in the bottom part of the fridge. Once things are out, take out the deli drawer and the crisper drawers. Take out the glass over the crisper drawers and below. Now you'll see the end cap. We only replaced the left side because the plastic knob that connected the deli cover broke off. So we had to pull out the left side cap. It was hard to pop out. We ended up breaking it as we used a screw driver to get leverage in popping it out. Take off the metal drawer hardware and put on new cap. Pop the new cap in. It went in way easier than taking out the old piece. Now that you are done with that put all the parts and drawers back in place in the fridge. The deli drawer cover will pop back on the knobs. It might take a little pushing on the sides to get it in place but it will evenly pop into place like the side cap.

Opened the refrigerator door, pulled down the filter cover, twisted the old one out and removed it. Placed the new one in - twisted it into place, replaced the cover and closed the door. It is working great!!

Unplugged appliance. Using a small putty knife I moved the switch out far enough to grab it with pliers. Moved wiring to new switch and pushed into place after testing.

Thought I needed a new filter. Did not solve the problem. I returned the filter to partselect as per instructions. Will order from partselect when I need parts.

Easy...

Pushed it on.

It was greqat to find this part so easily and to be able to buy just the glass shelf without added hardware. When it arrived, I just unpacked it, washed it and put it into its place in the refrigerator. Much easier than the cleanup of the shattered glass :-)

PartsSelect makes it so easy. I love that they inlcude a picture of each part so I am sure I am buying the right thing!

It was very easy, just unscrew old filter and screw in the new filter. Reset the warning light, and done. Ralph Mason, 403 Sundance Lane, Georgetown, TX 78633

removed the old filter. unwrapped the new one. peeled off the protective foil. inserted new filter as directed. placed old filter in sink to drain. ran "water" from dispenser to purge air from line. Shazam!

I unscrewed the old filter and screwed the new filter in the way the instructions said. I have done this before with no problems. Easy fix.

We had an Appliance Repair service come to fix, and they replaced the ice maker and the water valve, but ice maker was still not performing properly. We use RO water to fill the ice maker and because the water was also going through the charcoal cartridge, there wasn't enough water pressure to completely fill the tray. Plus charcoal filter was probably clogged. The original Blue Bypass Cap was nowhere to be found and I even called Kitchenaid to get one. They were of no help. But found your site, and found the part I needed. And best of all, ice maker is not jamming and is now making real ice cubes, not hollow, thin ones. And the water dispenser is now working too, so am very happy that such a small thing, fixed the big problem. Who knows, a clogged charcoal filter may have been the whole problem from the start.

Just replaced a water/ice filter..

Opened up the compartment where the old filter was located, twisted it to take it out (be careful not to spill water in the filter!), and installed the new one. Even a 64 year old woman had no trouble!