This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.
This bake element is found on the bottom of the oven. his bake element is for ranges.
The bake element is at the bottom of the oven and supplies the heat for baking.
Unplug the range or shut off...
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut o...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luther
December 7, 2019
Oven light will not go out, the door switch or the on off switch will not make it turn off
For model number JES9900BAS
Hello Luther,
Thank you for your question. Our sources suggest replacing the door switch under part PS11744229 for your model to fix the issue. Hope this helps!
Right front burner does not work, red light near burner stays on, wiring harness from control knob to burner appears to have shorted and shows burn marks at connector, used electrical tester to check if power is coming out of control knob unit to burner, no power, probably need new controller and harness from burner to control knob unit but i don't see any wiring harnesses listed as parts
For model number JES9900BAS
Hello Bill and thanks for writing.
These parts are discontinued for your model and are no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number PS1570174 Good luck with your repair. Jenn-Air 800-536-6247
We hope this helps. Please contact us anytime.
Oven does not respond to touch pad, clock lights but cannot control it. Oven is dead as well as the clock from any touch pad control. Fan or oven light touch control pad dead. Cook to works fine but they used control knobs. The oven functions died slowly with some features working longer before dying. Now no oven just a clock with the wrong time but the clock functions keeping the wrong time but well light.
For model number JES9900BAS
Hello and thank you for writing.
It certainly sounds like it could be a faulty oven control PS11745985 and/or faulty touchpad control PS11750321 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
The front right burner works on high but shuts off when i reduce heat
For model number JES9900BAS
Hello Tom,
Thank you for your question. Our sources suggest replacing the surface element control switch for the front right burner under part PS11749818 for your model to fix the issues. We hope this helps.
Was this helpful?
Thank you for voting!
Gerald
January 12, 2023
rapid heat cycle not working, takes oven much longer to teach desired temp.
For model number JES9900BAS
Hello Gerald, thank you for contacting us. We would recommend checking the thermostat, part number PS2085768, the bake element, part number PS11752540, and the oven temperature sensor, part number PS1570174. These parts can be checked with a multimeter for continuity. If this does not help, the issue is most probably related to a faulty control board, part number PS11745985. It monitors the temperature and controls the oven heat. We look forward to hearing from you if you need assistance with placing an order through our 7-day-a-week customer service. We hope this helps!
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.