Range Surface Element Control Switch Specifications
This surface element control switch is for ranges.
Surface element control switch turns the surface element on and off and controls how much heat the element produces.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Russell M - December 12, 2020
Verified Purchase
easy to install
part showed up fast and was easy to install. improved use of my most popular burner
★★★★★
★★★★★
Greg B - February 18, 2021
Verified Purchase
Fast delivery
Easy ordering and fast delivery
★★★★★
★★★★★
Christian V - September 21, 2023
Verified Purchase
So easy
I received the part in two days, easy to install. I received the instructions by e-mail from PartSelect, with my waybill. Thanks PartSelect ??
★★★★★
★★★★★
Jean Pierre T - December 5, 2022
Verified Purchase
Everything is OK.
Fast delivery and perfect product.
★★★★★
★★★★★
Derek K - August 4, 2022
Verified Purchase
As advertised
Good part, works well
★★★★★
★★★★★
Michael C - August 19, 2021
Verified Purchase
Arrived quickly
Easy install, element working.
★★★★★
★★★★★
Richard And S - February 9, 2022
Verified Purchase
Easy to install works like new
Very fast delivery. OEM part and best price
★★★★★
★★★★★
Albertus D - February 10, 2024
Verified Purchase
Switch on stove
Works great!
★★★★★
★★★★★
Terence R - August 26, 2023
Verified Purchase
No issues
Prompt delivery. Part was correct replacement - works fine
★★★★★
★★★★★
Marc D - March 30, 2021
Verified Purchase
Just like new
Identical part. No problem with installation. I recommend and would order from you again. Thanks
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Large 3000 watt burner control inop.
. Ordered part, cut out slide in oven sealant (to stop crumbs from falling between cook top and counter), 2 side screws, four bottom screws, two control mounting screws, unplug, plug in new control ($94), reattach control panel, slide range/cooktop back in, power up and test - total time 1 hr with approx. $200 saved!
Other Parts Used:
David from Clarkston, MI
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
18 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rf Element Would Not Heat
We installed a new infinite burner switch and the right front element still did not heat. We called a local appliance repair service. They ordered a new rf element and three days later came to our house and fixed the problem in 30 minutes. Cost for the repair service and new element $267. Cost for the infinite burner switch $98 plus $7 shipping. Total cost: $372. I'm not a big fan of do-it-yourself repairs, but my husband is always trying to save a nickle. In this case we lost time and money, but we have an extra infinite burner switch on hand "just in case. "
Other Parts Used:
JUDY from OGDEN, UT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
12 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large Burner of large/small burner would not stay on, but switch to the small burner.
Remove the burner knobs. Remove front cover/access panel at base of range. Detach vent fan duct from the fan. Unplug range and slide out entire range from the counter about an inch. Remove the four nuts from the bottom of the oven control panel. Remove the two screws on either side of the oven control panel, have a second person available to hold on to the control panel as you remove the last screw. While second person is holding the control panel, remove the two screws holding the infinite switch into the control panel. Take a picture or note exact orientation of infinite switch in control panel. Mine had an ABCD orientation, with A to the left B on top. Take a picture or note exact orientation of two sets of wires going into the infinite switch. Unplug the two sets of wires from the infinite switch. Replug the two sets of wires into the new infinite switch. Reverse all steps. Enjoy!
Other Parts Used:
Margaret from NORFOLK, VA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
20 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
July 25, 2019
The right front element on our Jenn-Air range is a custom control dual element. Both the large and small diameter parts of the element work with the switch, but the switch is getting wonky--e.G.,when turning the heat up with just the small element, we've got to be very careful or else the full large element heats up. The part number printed on the switch for this element is 8507p369-60. Do you have a replacement for this.
For model number JES9900BAB
Hello Bob, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11749818. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
April 21, 2018
The left front burner will not turn on either the small or medium burner. The element ohmed out good. The switch model number 8507p294-60. The number doesn't match any of the cross reference number. Will your part work?
For model number JES8850BAB
Hi Ted, Thank you for the question. The left front burner switch is our Part Number: PS11749818. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gabriele
May 7, 2018
The front left burner rings are behaving erratic. That means, sometimes both rings will come on, but if i turn down the heat one will turn off. Or only the small or only the large burner ring will turn on, although i am using the know to turn both burner rings on. If i turn the know a few times on and off, i can mostly manage to turn both burner rings on. I am assuming that i need a new switch for this burner element. Could you confirm that?
For model number JES8850BAS
Hello Gabriele, thank you for your question. Yes, to fix that issue you would want to replace the infinite switch for that burner to fix that issue. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dan
October 9, 2019
After the right front burner is turned off and the burner has cooled down, something behind the dial will click (sounds similar to a solenoid click), then the burner heats up. Is this due to a bad switch or something else? If it's a switch, would the part number be: Ps2003582 ?
For model number Jenn Air Electic Smoothtop #JES9900BAS
Hello Dan, thank you for inquiring. It is most likely this Infinite Burner Switch, part number PS11749818 for your model. You may also want to consider the Electronic Clock Oven Control, part number PS11745985. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
October 23, 2019
Switch makes a noise
For model number jes9900bab
Hi Charles, thank you for contacting us. Unfortunately if your switch is making a strange noise then you may need to replace the switch. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Donald
November 9, 2019
Right front burner has a dual burner, inner or both. The inner burner doesn't turn on. I have tested for continuity the rocker switch and it appears ok. Suggestions for burner switch?
For model number JES 8850 BAF
Hi Donald, the switch is part PS11744115. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Michael
November 20, 2019
Turn on front right double burner on hi and cycles off after about 15 seconds. Same thing happens when only using the single burner. Would this be the control switch? Element seems fine
For model number JES9900BAS
Hello Michael, Thank you for the question. Since the element still powers on, this sounds more like an issue with the Burner Switch. Hope this helps!
Was this helpful?
Thank you for voting!
Clayton
February 10, 2020
The out heating element of a dual element burning is not heating. Does the dual element need to be changed out or would there be an alternate cause for this?
For model number JES9900BAF
Good Day Clayton. Thank you for your question in regards to your unit (Model Number JES9900BAF). You may need to change the dual element, but it may also be that you have to replace the Infinite Switch or the control knob. We hope this helps! Best Regards.
Was this helpful?
Thank you for voting!
Aaron
October 19, 2021
My Right front dual element burner # W10823724 is not working on my Jenn-Air range JES9900BCS. The burner elements have continuity with 28O and 38O so it seems good. How do you test the Element Control Switch # WPW10185286 to see if thats defective? Thanks
For model number JESS9900BCS
Hello Aaron, Thank you for the question. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Art
November 30, 2021
Im looking for the control switch for the right front burner, its adual burner style, inner then dual heat
For model number JEC9536BDB
Hello Art, thank you for your question. We have researched the model you have provided, and we would suggest the Dual Burner Infinite Switch Kit, part number PS2003582. We hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749818
Manufacturer Part Number: WPW10185286
