Same-day Shipping Truly Canadian 1 Year Warranty 365 Day Returns

Models > JEC9530ADS > Instructions

JEC9530ADS Jenn-Air Cooktop - Instructions

All Instructions for the JEC9530ADS

broken knob to stove top.broken by me

First went to an appliance distrib. store.They would have to part.Was qouted a price.Wenthome and went online to partselect.com and saved 40% even with shipping.Got the part the next day!Pulled old knob off and pushed new knob on.Thank you for making it easy.

Parts Used:

Scott from Boca Raton, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 609 people found this instruction helpful.

Was this instruction helpful to you?

Broken knobs

We have had this appliance for 18 months. Within one month the first knob broke. A month later, the second knob broke. We have gently been using the remaining 2 knobs for 4 burner positions until recently when the other 2 broke. I am hoping these new knobs are made better then those that came with the appliance.

Parts Used:

Ginger from Hickory, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 609 people found this instruction helpful.

Was this instruction helpful to you?

broken burner knobs

So simple -- any monkey could do it. Pull off the old knobs and push on the new.

Parts Used:

Delton from Nevada, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 609 people found this instruction helpful.

Was this instruction helpful to you?

Knobs split and will not turn on burners

Removed old knobs and replaced with new ones.

Parts Used:

Daniel from Charlotte, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 609 people found this instruction helpful.

Was this instruction helpful to you?

I had a broken air vent knob on my range top.

The part was here three days after ordering and I put it on with no tools in less than a minure.

Parts Used:

Joan from Davis, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

19 of 610 people found this instruction helpful.

Was this instruction helpful to you?

previous owner broke knobs by not pushing down to turn on, then leaving the D rings on when they switched them. Only 1 burner was operating

I carefully pulled the 3 D rings that were left on the posts of the burner controllers with a pair of needle nosed pliers, made sure there was nothing on the controller posts, then put the new knobs on. Make sure there are no D rings on the oven knob posts, 2 of the knobs were fine, they just didn't have D rings in them. Partselect was great. Items were received within 2 days. I would definately recommend them.

Parts Used:

kim from Pahrump, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

18 of 608 people found this instruction helpful.

Was this instruction helpful to you?

replace burner knob

with my own two hands, just slip it on--- no story.you folks came through quikly with no complications and deserve a compliment.

Parts Used:

Jacob from Coral Gables, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

18 of 608 people found this instruction helpful.

Was this instruction helpful to you?

Burner knob got stripped out, taking them off and on...

Got on line and ordered part and lined up flat side of inside of knob and slid it on... That simple... The person who put them on after cleaning stove never knew there was a flat side inside knob.. We never stop learning, do we???

Parts Used:

Marv from Bella Vista, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

18 of 608 people found this instruction helpful.

Was this instruction helpful to you?

2 of the burner knobs were loose, could not turn eyes on.

Took off the old knobs, replaced with new ones.

Parts Used:

Thomas from Royse City, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Stove Knob Was Split

I removed the split knob and slipped the new knob right on. The knobs look metal but are actually plastic and split over time and use. Really easy to replace. Thanks part select.

Parts Used:

Janice C. from Breaux Bridge, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

The female D stem fitting of the control knob cracked, we could not turn on / off or control temperature to that heated area.

We replaced the control knob with an exact replica from PartSelect at a very reasonable price – Thank you.

Parts Used:

Richard from Harrisville, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

plastic split

remove knobs from pkg, remove broken knobs from range insert new knobs wallah done.

Parts Used:

Walter from Spring, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

cracked knob

Pushed the knob down on the spindle. Second order in three years.

Parts Used:

Patricia from Elizabethton, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Burner Knobs would crack in the middle

The original knobs were poorly made and kept braking. After the third set, which were very expensive for some plastic knobs, I read this web page for help. Based on what I learned and what I read, I glued the metal sleeve in the knob shaft with some super glue. I then wrapped the shaft with copper wire and spread some industrial glue over the copper wrapping, which looked like a spring around the shaft. I have had no problems in the last month. I hope it keeps up.

Parts Used:

John from Whitesboro, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Broken Knob

Take old off and put new on

Parts Used:

KEN from REDDING, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

All Instructions for the JEC9530ADS