Models > JE1860WH03 > Instructions

JE1860WH03 General Electric Microwave - Instructions

All Instructions for the JE1860WH03
76 - 88 of 88
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Renter broke the tray
Very easy you just have to make sure that the tray is in the groves for the wheels :)This is the best place to shop as I have used them on all kinds of appliances and they have never let me down when it comes to price and delivery time!
Parts Used:
Glass Cooking Tray
  • Tammy from Buckeye, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
glass tray cracked and broke and the rotating ring did not rotate
Easy-easy-easy...just took out the old broken tray and installed the new one. We did the same with the ring. The service from this company was excellent!! Ordered on a Saturday and received it on Tuesday....
Parts Used:
Glass Cooking Tray Rotating Ring Guide
  • Barbara from Meredith, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the rotating ring broke.
remove the glass, remove the rotating ring, install the new ring, replace the glass and my wife fixed it in 30 seconds.thanks for the providing the part.Ed
Parts Used:
Rotating Ring Guide
  • Edward from Cypress, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Microwave would not heat
I went on line, put in microwave repair and watched a video on repair. I then took the oven down from over the range and took it apart. I could see were the magnetron had burned out. There was a hole with obvious burn marks. I went on line looking for the needed part. I clicked on PartSelect and order the magnetron. I received the part within three days, regular shipping. As I had not put the oven back together it took only a few moments to save 150 to 200+ dollars. I put it back together and happy, happy me, it worked.
Parts Used:
Microwave Magnetron
  • David from Roanoke, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cover stirrer melted because microwave was left on with nothing in it.
I only had to snap the parts into place
Parts Used:
COVER STIRRER FAN BLADE-STIRRER
  • Norman from Raleigh, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
turn table arm
I did the repair in less time than getting the part, WHICH WAS FANTASTIC. Took a needle nose to get out the broken part and put the new one in. Works like new ! Recommend this place for repair parts, but this is just my own experience.
Parts Used:
Rotating Ring Guide
  • Tim from Hanover Park, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Glass cooking tray was cracked
I ordered a new one by calling the 800 number, gave them my model number and ordered a new one on the phone and paid with my credit card. It was shipped the same day and I received it on the second day by Fed-X.
Parts Used:
Glass Cooking Tray
  • Fran from Geyserville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Original "Rotating Ring Guide" was broken where it goes through the bottom of the microwave.
I installed the new "Rotating Ring Guide" by setting it on the floor of the microwave with the gear socket going through the bottom of the microwave to engage the gear that turns the rotating ring guide. I then set the glass cooking tray upon it and the job was done. About 30 seconds start to finish.
Parts Used:
Rotating Ring Guide
  • TROY from DIXON, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Turn plate started making clicking noises and eventually stopped turning
It was extremely easy. I put the microwave on my table upside down and could see the motor thru the holes in the bottom cover. It appeared as though the outside skin had to be removed to access the motor but after looking at it there is an access panel I did have to cut it loose. Not bolted on. There was a message stamped into the bottom case next to the panel that said to debur after panel is removed. So I cut it loose on 3 sides was able get to the one screw swap the motor and reinstall it in about 5 minutes. It works like new What an easy and quick repair. Thanks
Parts Used:
Synchronous Motor
  • Henry Lindsey from Slidell, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The glass turntable was cracked in half
I removed the new tray from the box and slid it into the microwave. That's it.
Parts Used:
Glass Cooking Tray
  • Kristy from Blue Bell, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
microwave won't heat
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Parts Used:
Microwave Fuse
  • Stephanie from Kernersville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Microwave Function Not Working but Speed Cook Okay
Used diagram on the web-site and a screw driver to replace the fuse and just one of the 2-Terminal Micro-Switches. When I looked at the three micro-switches one of them had a brown connector and you could see it had been burned. I just replaced that 2-Terminal Microswitch and the connector and the Fuse. Now the Microwave is working fine.
Parts Used:
Microwave Fuse SWITCH MICRO Primary Door Interlock Switch
  • Brett from Pleasant Hill, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
When trying to run, intermittently, the light would come on but the tray wouldn't rotate or cook. When the door was open, the tray would intermittently rotate.
I pulled out the unit and found 2 interlock switches that are depressed when the door closes. After cycling the door open/closed I found that one of the switches occasionally would stay depressed. The repair was easy (after I took off the panels so I could get to the switch) I simply removed 2 screws that attached the interlock switch assemblies to the main unit. Then I popped out the defective switch and popped in the new one. This did indeed fix my problem.
Parts Used:
Primary Door Interlock Switch
  • Sam from Chandler, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JE1860WH03
76 - 88 of 88