AGR6603SFS4 Amana Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
Parts Used:
-
John Davenport from Upper Black Eddy, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cook top just wore out
was a simple unplug the old and plug in the new
nothing to it.
best thing is wife was happy .........for a little while anyway
nothing to it.
best thing is wife was happy .........for a little while anyway
Parts Used:
-
TIMOTHY from STURGIS, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front (large) element was erratic. At times it wouldn't turn on and at other times it remained on high.
I took the old cartridge out and inserted the new one. Both elements heated as they should and that side of the range top looks brand new!
Parts Used:
-
William from Gresham, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Erratic Electric Burner Performance
It took about five minutes to unpack the new burner module and two minutes to install it. I then took five minutes to tell my wife what a genius I was. She told me she always knew I was "handy".
Parts Used:
-
Steven from Clarkston, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric Burners did not work.
This is very easy The JennAire burner modules slide out very quickly. I was able to do both modules for $360 versus buying a new JennAir stove top for over $1200.
Parts Used:
-
Steven from Clarkston, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement
Great service. Exact replacement unit. I recommend your company
Parts Used:
-
Francisco from Longwood, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burners not working
just plug in cartridge. Put one in looked so much better got a cartridge for other side. stove top looks new now.
Parts Used:
-
richard from richland, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
27 year-old heating cartridges worn out!
Called Parts Select - Susan (that talked with me) very helpful - got my purchase shipped that afternoon so I could start to cook again!! Received cartridges two days later! Thanks Parts Select!
Removed old cartridtges and plugged in the new - in time for dinner!
Removed old cartridtges and plugged in the new - in time for dinner!
Parts Used:
-
Nancy from Ilion, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
23 Year Old Cooktop. Both Cartridges Were In Very Poor Condition . Two Of The Cooking Elements Did Not Work.
The repair consisted of opening the package and placing the new cartridge into position. Looks good and works like new. Delivery was within two days. Thanks.
Parts Used:
-
bob from holt, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners would not heat properly, and eyes could not be leveled.
Pulled old element out, cleaned electrical connector. Cleaned drip pan. Replaced with new unit. The new element was of a better design than the original. I will order second set soon to match.
Wife very pleased too.
Wife very pleased too.
Parts Used:
-
William from Pauline, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cartridge element old; rusted out
Removed old cartridge and replace new cartridge. unplug one and plug the other.
Doing this with Parts Select saved money and time. The part was delivered to my office in the 3-5 days promised. I am very satisfied.
Doing this with Parts Select saved money and time. The part was delivered to my office in the 3-5 days promised. I am very satisfied.
Parts Used:
-
JAMES from FALLS CHURCH, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced a *grill* setup left us by the previous owner which vented on our knees - grease, etc. - not a bright idea.
Since it is an Admiral stovetop I rolled the dice that the Jenn-Air cartridge fit. It did.
It would be helpful to kitchen owners that part equivalency be shown since I could not find any model number(s) on the stove top.
The cartridge works very well (I expected that) and fit the contour of the black top like a glove. The price was the best of many sites I visited.
It would be helpful to kitchen owners that part equivalency be shown since I could not find any model number(s) on the stove top.
The cartridge works very well (I expected that) and fit the contour of the black top like a glove. The price was the best of many sites I visited.
Parts Used:
-
Christel K from Willimantic, CT
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
elements would not heat up
Disengaged the old cartridge and replaced with the new one ---simple as pie-----the real issue is that it was ordered and delivered with-in 4 days---in a well pack and insulated box---great service---
Parts Used:
-
George from East Otis, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
my ultra quick-start radiant element could"t keep it clean
just pulled the radiant element out and plug the new one in. I"m so glad lowes didn"t have this part, because your part was cheaper. thank you
Parts Used:
-
allie from gaston, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Eyes would not heat or heated very slowly.
Remove cartridge by pulling up and out of plug. Replace cartridge by sliding it into the plug.
Unpacking the cartridge took more time than replacing it.
I originally bought one, but it was so easy and arrived so quickly, I replaced the other cartridge as well.
Also, it was $60.00 less per cartridge than the Jenn-Aire company was selling them for!
Unpacking the cartridge took more time than replacing it.
I originally bought one, but it was so easy and arrived so quickly, I replaced the other cartridge as well.
Also, it was $60.00 less per cartridge than the Jenn-Aire company was selling them for!
Parts Used:
-
Jill from Durham, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 181 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!