AGR6603SFS4 Amana Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn Oven Seal
If you have some mechanical ability it is a eazy fix, remove the 2 screws attaching door to oven, disassemble the back screws, and inner panel, remove oven seal, and reverse the process.
Parts Used:
-
Wesley from Avon, IN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Parts Used:
-
Howard from Boynton Beach, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
23 of 70 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
Parts Used:
-
Deborah from New Plymouth, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
Parts Used:
-
JohnPaul from Ft. Bragg, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were not working, metal was old and destroyed.
I pulled out the old cartridge, cleaned the stove top and inserted the new cartridge. No problem!
Parts Used:
-
Karen from Bethlehem, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part shorted out due to rust
-
vivian from west orange, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
Parts Used:
-
Harriet from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coil element not working
-
Johnny from Trinity, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old cartridge functioned poorly
ordered new cartridge slid it into place, it is great, easy to obtain and install, what a fabulous service PartSelect provides. Thank you!
Parts Used:
-
Vencine from east setauket, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A cartridge (set of 2 electric burners) which I bought 6 months ago had a short.
1 phone call to PartSelect and I found out they warranty their parts for 1 year. They shipped a new one immediately.
Great service!
Great service!
Parts Used:
-
Marilyn from Bloomfield Hills, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace Jenn-Air Coil Element
-
Ruth from New Hope, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating elements were old and not working
removed old cartridge and inserted new cartridge, less than 10 seconds. Wish I had replaced this cartridge several years ago. I have ordered a second one to replace the remaining old one.
Parts Used:
-
Linda from Neenah, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original glass top shattered.
-
Kathy from Greer, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Coil Elements did not heat
The hardest part was making the commitment to sit down at the computer and order the parts! Part Select had the best prices and the best detail/photographs of the coil element cartridges. I felt confident that the parts would fit in my older model cooktop from the information provided. I ordered on Saturday, the parts were delivered by noon the next Wednesday. Order confirmation was provided as well as delivery tracking information. The parts were well packaged in a large outer box. The burner cartridges were in two smaller boxes within, securely wrapped in plastic and protected with styrofoam on the ends. I pulled my existing cartridges out of the cooktop outlets, cleaned the cavities below the burners and plugged in the new cartridges. Then, I turned each burner on to make sure they worked. I have been in awe at how easy that was ever since---it looks like a brand new cooktop!!! Everything was brand new and each cartridge came with a Jenn Air use and care manual. I am thrilled!
Parts Used:
-
Regan from Reston, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My stove is a 1985 model and the coils did not heat evenly any more.
When I called to inquire if a new cartrige would fit in my 1985 model range the gentleman walked me through unplugging the old cartrige to see how it connected. I did this while on the phone with him and I then explained the connection; he told me that a new cartrige would just plug into the same place....and it did!
You had a great person at your service desk.
Thank you
You had a great person at your service desk.
Thank you
Parts Used:
-
Linda from Toledo, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!