All Installation Instructions for Kenmore Range 79061130102

Pitted, Eroded Drip Pans

1. First I pulled out the heating element from stovetop and removed old pan (no screws) very simple. 2. Put new pan in and inserted the heating element back in place.

Parts Used:

Drip Bowl - 8"

Josephine from Malden, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Old cooktop burner element died.

First I unplugged the element that wasn't working and switched it with one that was to confirm that it was the burner element, and not the cooktop wiring, that was the problem. Once that was confirmed, I ordered a new element from partselect.com. Upon arrival of the new element several days later, I plugged it into the empty plug on the cooktop and voila, we're cooking on all 4 again.

Parts Used:

6-Inch Coil Burner Element

Lawrence from Plainview, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Original rear glides had broken

Took the new parts out of the bags, slipped them into place and had the drawer working flawlessly in less than 5 minutes!
I surprised myself.

Parts Used:

Rear Drawer Glide

Jeff from Irvine, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Best deal on the internet for a factory grate.

Ge wanted over a hundred dollars for the same part you charged only $80. Thanks. I'll be buying again.

Parts Used:

Rear Drawer Glide

Aaron from Miamisburg, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

replace drip pans

replaced drip pans due to rust

Parts Used:

6" FM CHROME DRIP B

Drip Bowl - 8"

david a from whitingham, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Draw would fall into the floor when opened

I watched the video before ordering the part. When it arrived, I knew exactly what to do. No tools were needed. It took me 2 tries to get the drawer aligned properly but the whole repair took about a minute. The video was invaluable!

Parts Used:

Rear Drawer Glide

Tracy from Frankfort, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Range burner coil worked intermittenly

Unplugged range and cut wires on existing burner plug. Connected the replacement plug with the provided wire-nuts. Secured with provided shrink-wrap. Reattached burner plug to to range top, and plugged in the burner coil. Presto.

Parts Used:

Terminal Block Kit

MARK from LIBERTY LAKE, WA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Drawer was hard to close

I am a 74 year old single woman. I removed the drawer and replaced the guide which has been missing for some time. Wish I had none about your company a long time ago.
Thank you

Parts Used:

Rear Drawer Glide

Catherine from Washington, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

needed drip pans that fit correctly

Replaced drip pans and now my elements sit level!

Parts Used:

6" FM CHROME DRIP B

Drip Bowl - 8"

Terry from Wann, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Corroded chrome drip bowls.

Merely removed the old drip trays and replaced them with the new ones I ordered.

Parts Used:

6" FM CHROME DRIP B

Drip Bowl - 8"

Abraham from Albion, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Broken drawer glide

First i removed the drawer. Then i removed the broken drawer glide and replaced it with the new one. Then i put the drawer back! The parts were a perfect match...

Parts Used:

Rear Drawer Glide

Jeffrey from West Kingston, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Broken drawer glide

I used a screw driver to pop the broken glide out and then snapped in the new one. The repair took all of about 30 seconds. It probably would have taken even less time if the former owner had not epoxied the broken piece in place.

Parts Used:

Rear Drawer Glide

Myles from Twin Falls, ID
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

I accidently threw away the drawer glide, when it fell off one day b/c I didn't know what it was. Later on when I started pulling out the bottom stove drawer, I discovered that it wasn't gliding properly....duh...

I just placed the new glider in place and put the drawer back on its hinges and it was good to go... my wife was extremely happy

Parts Used:

Rear Drawer Glide

Reginal from Tampa, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Broken drawer glide

Simply secured new glide into slot. I was more impressed at how easy this company made it for me to find the part I needed. And, they shipped immediately. This company is great.

Parts Used:

Rear Drawer Glide