Models > 7761A-71 > Instructions

7761A-71 Norge Dryer - Instructions

All Instructions for the 7761A-71
91 - 105 of 143
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
lint filter broke
Not sure had hubby fix it!
Parts Used:
Lint Filter
  • Kellie from Lake Wales, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't stay closed
I used a screwdriver to pry out the broken door latch and inserted the new one in the same slot. Perfect fit. The picture of the part in the order page was a big help to identify the correct part.
Parts Used:
Dryer Door Catch Kit
  • Luis from Arlington, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced lint filter on dryer
Replacement was simple & easy
Parts Used:
Lint Filter
  • Kenneth D. from Norcross, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mouse ate hole in lint filter
Glad I ordered 2 lint filters. Mouse ate a hole in the new one also. EXCELLENT service, by the way. Received filters less than 24 hrs. after ordering.
Parts Used:
Lint Filter
  • Diane from Andrews, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the frame of the lint filter was cracked
well.....first I opened the dryer door and pulled out the old cracked lint filter...then I took the new lint filter out of the plastic bag and put it in the dryer......and then I closed the dryer door.....then I had a beer.
Parts Used:
Lint Filter
  • stephen from Harrisburg, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Terminal block and power cord melted.
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.
Parts Used:
Terminal Block
  • Michael from Orient, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Install new latch
Just snapped the new plastic latch into the hole (the hole was there because in trying to extract the old latch, it fell into the inside of the door). Took two seconds. Order to arrival of the part took only 22 hours!
Parts Used:
Dryer Door Catch Kit
  • Russell from Alexandria, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squealing Berring
I had to replace the whole motor, Idler spring and idler Pulley Wheel. It went well but I wish I could have replaced just the berring and not the whole motor.
Parts Used:
Drive Motor Idler Spring Idler Pulley Wheel
  • Marty from Sterling heights, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
11 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint filter mesh had tears on it.
just replaced the part. I was happy how simple it is to order the parts from PartSelect, and be able to get the right measurement needed.plus how fast it came.
Thank You and Keep up the good work. Ada APONTE
Parts Used:
Lint Filter
  • Ada from Albion, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 95 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tear in old filter
There was no reair needed. We just needed to replace the filter. The new filter arrived in a very short time and now we are drying clothes without losing lint through the dryer vent.
Ordering was easy with just the model and filter number which was listed on the dryer door. I was even given a diagram on the computer screen as to where to locate all the parts numbers needed.
This was a very satisfying order experience!
Parts Used:
Lint Filter
  • sarah from Cumming, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 637 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint Screen was cracked.
I threw out the cracked lint screen and put the new one in it's place. I don't know why I waited so long to order the replacement part.
Parts Used:
Lint Filter
  • Julia from Randolph, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 637 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door seal was dry rotted
carefully pulled out old seal, then popped in new seal
Parts Used:
Door Seal
  • Kim from North Windham, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The door would not shut
Pushed in the Door Catch, and it was fixed.
Parts Used:
Dryer Door Catch Kit
  • Deborah from Worcester, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old seal broke lose
At first I thought I had the wrong part. But a quick call to the service number solved the problem. Seems the only part now available is a double wide strip with two sets of molded clips. Simple solution was to pull the strip apart into two. Worked like a charm.
Parts Used:
Door Seal
  • George from Phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
seal was loose and letting air escape
Pulled the old one off .Dry fitted the new one and pushed the retainers in place,took about 5 minutes.thank you.
Parts Used:
Door Seal
  • David from Hampton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 7761A-71
91 - 105 of 143