61004753 Kenmore Refrigerator - Instructions

Most importantly, watch the video.Made installation real simple. Better than paper instructions that come with kit.

Easy to install and it works fine. Recommend using the instruction manual and it was a breeze

I watched the repair video before I even ordered the part. That helped me determine if I felt I could make the repair. The video was extraordinarily helpful. Can't say enough about it. I even took off the dispenser door to see if I thought I could do it. The part arrived quickly, in just a couple of days. I only needed the door flap but it came with the solenoid which is not uncommon on ordering parts. (I couldn't even find the part on other web sites much less a video on how to repair.) I reviewed the video again. I removed the drip tray and door facing as instructed. When removing the mechanism I did get incur a slight electrical shock. I had not unplugged the refrig. Duh.. Got the mechanism out and inserted the door flap. The solenoid strike bar had come out and I had a slight problem getting that back in but referenced the video and no problem. Put in all back in place. Had to clean out the ice bin some because water had frozen in the bottom. Put it back in, plugged in the refrig and I am back in business! Terrific! The video was the key for me. It gave me confidence with very clear instructions. Bill

It was not that hard. I am not totally inept, but also not a mechanice or techie. I have discovered that a lot of repair jobs have a video that shows you how to do things, and seeing it done makes a task doable for me.

i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .

The repair did not work. The new door strike did not embrace the solenoid.

I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.

Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.

First we ordered a new solenoid. . . The little piece that opens and closes whenever you push the button to dispense ice. That definitely needed to be replaced, and it was easy to do. However, that didn't fix the problem, so we looked and looked at the assembly and decided that a spring was missing. We ordered the spring, and when it arrived, we found that it matched exactly one that was already on the assembly. :-) Not the problem. Thirty minutes later we figured it out,. The diagrams at part select were not helpful with this. It was a matter of figuring out how the magnetic weight fit into the assembly. That's all it was! Now we have an extra spring for the future.

The replacements parts were aftermarket parts so I could not simply replace the one piece I needed. I did replace all the original parts with the aftermarket parts and it works perfectly. I wish the design was closer to the original, but it is just as functional. The only problem I ran into was the images on the instruction sheet were difficult to see. The text however did an exceptional job of explaining each step.

shut water off to fridge. remove dust panel from bottom of fridge on back of fridge. remove screws on bracket that holds water valve. remove lines(2) that connect directly to top of water valve (keep track of which line goes to which side on top of valve). cut about 1/2 inch off of those 2 water lines. take those 2 water lines and just insert/push them into their proper location on top of new water valve. reattach bracket. replace dust panel. turn water back on to fridge and check for leaks.

I just lifed the old grate off and layed the new one in.

First I cut the power to the refrigerator. Followed the instructions for removing the door panel. Disconnected the electrical panel to the door controls. replaced the flap only and reassembled. Hate I had to by the solenoid when all I needed was the flap. Ordered the part and had it the next day, very fast shipping. I have used PartSelect for other appliance parts and had good service from them.

Got online typed in Maytag repairs. Watched the repair video. At that point I removed the door assembly (5 screws total) saw the broken door. Ordered the part from Partselect. Part was delivered in 3 days and installation was a very easy process.Thanks for the help.

Your video made this repair simple. Thanks for the info. Also received my parts on time. Keep up the good job .

I followed the directions from the YouTube video, which were spot on correct! Loved it. No problems. I did have to wind the spring one more turn than it showed on the video, but that was easy to figure out. No problems!

I accessed the model with the model number, isolated the part and ordered it online. Very simple procedure and great online interface to identify the part. On receiving the part I disconnected the water line, followed the instructions to remove the bracket and then the valve. Re-attached the new valve and replaced the bracket. Attached the water supply and tested the valve. Once it all worked fine I moved the refrigerator back into position.