61004753 Kenmore Refrigerator - Instructions

I removed the outer cover from the door, removed the broken parts, and cleaned the area of debris. After cutting off the power, I replaced the solenoid and door, then prepalce the outer cover. The parts were delivered promptly, and the job when very well.

Couldn't believe how easy this was. The pictures you provided were perfect everything went exactly as the instructions said. I had to of saved at least $150.00. I would grade my mechanical skills at about a C+ at best and this was an easy fix.
If I need appliance parts, I now know where to go.

It was not that hard. I am not totally inept, but also not a mechanice or techie. I have discovered that a lot of repair jobs have a video that shows you how to do things, and seeing it done makes a task doable for me.

I went to your site thinking the problem was lack of electronic/elec signal. Wrong! I then was guided to your "ice door repair kit". I only then realized(after viewing the repair video) that ice door SOLENOID failure was far more likely than elec circuitry failure.Since it was inexpensive I ordered the kit......gambling that it would fix it; and it did! On my first try I installed the close-door spring wrong but then reviewed the video and instantly saw my error and corrected it. I also got an elec nibble (shock) once because I hadn't disconnected as the video said to do. Good parts,good information, timely response! "Piece of Cake"! Cheers John Taylor

Most importantly, watch the video.Made installation real simple. Better than paper instructions that come with kit.

My part was received in only 3 days. It was exactly what I need. The directions sent with the ice door were really simple to follow. Within 30 minutes my family was back to getting ice from the refridgerator door. Nobody wants anything to tear up, but I hope if I do have troubles in the future, it's something that partselect carries parts for. These days it's hard to find a business that gives you want you want, quickly, for a fair price. If you were a movie I would give you two thumbs up. Thanks for making this a good outcome and not just another headache!!

i removed the front cover of the dispensor, easily put the parts in and put back together , the first tome the flpapper came off as i did not secure properly but it only took a few minutes to resecure and now working fine .

The repair was easy following the instructions provided with repai kit. pictures were a little blurry but other wise very helpful.

Ice Dispense Repair on front door:
Just followed the directions to remove that front panel, removed the screws, as needed, to take out the unit. The new parts installed easily, in fact, much easier than I thought it would be. Just re-assembled unit and was back in business...

I watched the repair video before I even ordered the part. That helped me determine if I felt I could make the repair. The video was extraordinarily helpful. Can't say enough about it. I even took off the dispenser door to see if I thought I could do it. The part arrived quickly, in just a couple of days. I only needed the door flap but it came with the solenoid which is not uncommon on ordering parts. (I couldn't even find the part on other web sites much less a video on how to repair.) I reviewed the video again. I removed the drip tray and door facing as instructed. When removing the mechanism I did get incur a slight electrical shock. I had not unplugged the refrig. Duh.. Got the mechanism out and inserted the door flap. The solenoid strike bar had come out and I had a slight problem getting that back in but referenced the video and no problem. Put in all back in place. Had to clean out the ice bin some because water had frozen in the bottom. Put it back in, plugged in the refrig and I am back in business! Terrific! The video was the key for me. It gave me confidence with very clear instructions. Bill

The repair did not work. The new door strike did not embrace the solenoid.

I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.

Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.

followed the direction that came with the part. really easy. Thanks

Followed instruction provided. Ice door only part required.

Easy to install and it works fine. Recommend using the instruction manual and it was a breeze

The parts just arrived -- wow, I think I've found my favorite parts supplier!!!

Ironically, I had jury rigged a new tab on the ice door by inserting a screw into where the tab snapped off, but it didn't work! As I was taking it apart this time, I realized that the solenoid spring had become unclipped. However, it's nice to have it all back together again and working with new parts!

Thank you -- great packaging, the parts look fantastic, and a great sheet of instructions! I've already repaired my refrigerator (only took about ten minutes) and it's up and running!

Thank you!!