Models > 22310 > Instructions

22310 (1988) Kenmore Range - Instructions

All Instructions for the 22310
91 - 105 of 329
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The original grill didn't work well, and I needed 4 eyes to cook on. I received the new module quickly, and had it installled in 20 seconds. Immediate heat and good looks. It really transfors this old range!! Thanks!!
Lifted out and unplugged grill. Plugged in and put in place new module. I tested it right then and it worked great!
Parts Used:
Black Radiant Element Cartridge
  • Frederick from Birmingham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
installed griddle and new burners
unplugged old one and installed new griddle and burners. very easy and less than 30 seconds to complete.
Parts Used:
Non-Stick Griddle for Electric Elements
  • Marty from Florence, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element failed
Simple plug in.
Parts Used:
Range Grill Element
  • Andrew from Salem, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
eyes burned out on old cartridge
Simply unpluged the old cartridges and plugged in the new ones, it could not have been easier. My 18 year old cooktop looks brand new. My old cartridges were black and the new ones are stainless, but, the look is good, since most new appliances are now stainless. The best part is that it cost less than half of what a new cooktop would have cost plus all of the mess that would have been made tearing out the old one and installing a new one. Thanks PartSelect, A Very Satisfied Customer.
Parts Used:
Cartridge 4 Spades - Stainless Steel
  • Dwayne from Minden, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old filter to replace
:-) - Just removed the old one and replace with the new one. Nothing to it. Takes 30 seconds.
Parts Used:
Range Grease Filter
  • Colette from Baton Rouge, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan switch broken
No problem, except the holes in the clips to hold the switch in were so small that the clips would not go over the pegs.
The solution - use supper glue.
Parts Used:
Fan Switch Kit
  • Bernard from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove did not include any burners only grill
When burner insert arrived just plugged in. Piece of cake !
Parts Used:
Stove Cartridge Assembly
  • Malcolm from Lynchburg, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cooktop did not heat up
Just unplug the old broken cartridge and plug in the new one. It was very easy. Took 5 minutes.
Parts Used:
Radiant Smoothtop Cartridge Assembly
  • connie from demarest, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old coil went out
I pulled out the old cartridge cleaned the stoptop up. Plugged in the the new cartridge ..there was a little steam left over fromt he cleaning when I turned up the heat but it went away. Looks great and save me $3k the difference in the price of a new stove top.
Parts Used:
Range Glass Grease Collecting Jar Non-Stick Griddle for Electric Elements Radiant Smoothtop Cartridge Assembly
  • Megan from Camarillo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I wanted to replace the grill set and the older style solid cartridge element in my cook top.
I simply removed the old cartridge by lifting it up and pulling the plug end out. I slid the new coil cartridge with the plug end in its place. The grill replacement was similar. Remove the grll grates, pull out the burner element from its plug position, remove the grill rocks and insert the new coil cartridge in its place. No tools or special skills required. It's like I now have a new cook top.
Parts Used:
Stove Cartridge Assembly
  • John from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element was bad and couldn't locate anywhere else for this price. Outstanding service and phone assistance. Will use again for sure!
Simple repair. Unplugged element cart. and replaced.
Parts Used:
Radiant Smoothtop Cartridge Assembly
  • William from Lebanon, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cartridge did not heat
Unplugged the old element and plugged in the new one.

The best part was it arrived less then 24 hours after I ordered it. Unbelievable, thank you.
Parts Used:
Radiant Smoothtop Cartridge Assembly
  • Jean from Gloucester, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch was broken
If you are buying online, i'm sure you know to remove atleast 2 screws! and fit them back. It’s very easy to fix it. Only thing that took time out of the 15 minutes is to push the metallic push nuts! But it was interesting to do that. Partsselect.com is really a good site
Parts Used:
Fan Switch Kit
  • venugopal from edison, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Disintegrated grease filter and disfigured grill cover.
I was delighted to find that the parts to a Jenn-Air range which was new in 1985 were available from PartSelect.

Website very user-friendly; shipping immediate; parts were just right; they fit and they enhance the range tremendously.

I was 100% pleased!
Parts Used:
One Piece Electric Cartridge Cover Range Grease Filter
  • Jean from Cumberland Foreside, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grill elemnt on ancient Jenn-Air died
Just replaced old with new, it plugs in same as old.
Parts Used:
Range Grill Element
  • John from York, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 22310
91 - 105 of 329