Sander Parts

Your Price

$13.95

PartSelect Number PS10140177

Manufacturer Part Number 158324-9

This is a genuine Makita replacement part, it is sold individually. It has a soft foam pad with a metal backing. It has six vacuum holes for use with the 166078-4 Dust bag. It is remove by unscrewing four 266020-6 Screws. The sandpaper is held by two clamps on the base assembly.

Your Price

$36.95

Sander Hook And Loop Pad

PartSelect Number PS10154103

Manufacturer Part Number 743081-8

This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.

Your Price

$6.95

Sander Cord Guard

PartSelect Number PS10153918

Manufacturer Part Number 682502-4

This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool will help will cord life. This cord guard is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.

Your Price

$5.95

Sander Insulation Washer

PartSelect Number PS10153908

Manufacturer Part Number 681656-4

it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.

Your Price

$17.95

Sander Brake Ring

PartSelect Number PS10151383

Manufacturer Part Number 424131-5

This brake ring is an authentic component. It is sourced directly from the original equipment manufacturer for use with Makita sanders. The brake ring fits on top of the sander pad. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic and is sold as an individual component. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a screwdriver to remove the sander pad in order to replace the brake ring.

Your Price

$15.95

Sander Switch

PartSelect Number PS10153604

Manufacturer Part Number 651285-7

This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing

Your Price

$5.95

Sander Retainer ( Includes Self Tappi

PartSelect Number PS10168760

Manufacturer Part Number 286181-00

This item is an authentic, OEM sourced replacement part that is intended to be used with random orbital sanders from DeWalt, Black & Decker, and Porter Cable. The retainer is used to support the bearing between the fan and the sanding pad. This item is available as an individual replacement part.

Your Price

$5.95

Sander Washer 10

PartSelect Number PS10144418

Manufacturer Part Number 253951-8

Genuine OEM Authorized replacement part designed for Makita Disc Sanders. This part is made out of Metal and it is Sold Individually. This Washer helps to secure the Plastic Pad to the Unit. You would need a Hex Key/Allen Wrench to remove the Screw that secures it.

Your Price

$10.95

Sander Switch

PartSelect Number PS10153639

Manufacturer Part Number 651527-9

This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:rn • The tool has completely stopped functioning - it will not start. rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all.rn • The variable speed function and electric braking aren't working properly.

Your Price

$7.23

Sander Bearing Retainer

PartSelect Number PS10180805

Manufacturer Part Number 603637-00

Genuine OEM replacement part designed for certain Random Orbit Sanders. This item is made out of Metal and it is Sold Individually. This is the bottom Bearing Retainer that keeps the bearing in place. It is attached to the fan with 3 screws which are Sold Separately.

Top Brands

Top Product Types

Popular Sander Parts

Sander Brands

Popular Sander Models

Sander Parts

Find Your Part

Popular Sander Parts

Sander Brands

Popular Sander Models