Makita Sander Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Makita Sander Parts
Your Price
$13.95
In Stock
Makita Sander Complete Backing Pad
PartSelect Number PS10140177
Manufacturer Part Number 158324-9
This is a genuine Makita replacement part, it is sold individually.
It has a soft foam pad with a metal backing.
It has six vacuum holes for use with the 166078-4 Dust bag.
It is remove by unscrewing four 266020-6 Screws.
The sandpaper is held by two clamps on the base assembly.
Your Price
$36.95
In Stock
Makita Sander Hook And Loop Pad
PartSelect Number PS10154103
Manufacturer Part Number 743081-8
This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.
Your Price
$6.95
Special Order
Makita Sander Cord Guard
PartSelect Number PS10153918
Manufacturer Part Number 682502-4
This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool will help will cord life. This cord guard is compatible with the tools listed below, but it is not guaranteed to fit any other power tools.
Your Price
$5.95
Special Order
Makita Sander Insulation Washer
PartSelect Number PS10153908
Manufacturer Part Number 681656-4
it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.
Your Price
$17.95
Special Order
Makita Sander Brake Ring
PartSelect Number PS10151383
Manufacturer Part Number 424131-5
This brake ring is an authentic component. It is sourced directly from the original equipment manufacturer for use with Makita sanders. The brake ring fits on top of the sander pad. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic and is sold as an individual component. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a screwdriver to remove the sander pad in order to replace the brake ring.
Your Price
$15.95
Special Order
Makita Sander Switch
PartSelect Number PS10153604
Manufacturer Part Number 651285-7
This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing
Your Price
$5.95
Special Order
Makita Sander Washer 10
PartSelect Number PS10144418
Manufacturer Part Number 253951-8
Genuine OEM Authorized replacement part designed for Makita Disc Sanders. This part is made out of Metal and it is Sold Individually. This Washer helps to secure the Plastic Pad to the Unit. You would need a Hex Key/Allen Wrench to remove the Screw that secures it.
Your Price
$10.95
Special Order
Makita Sander Switch
PartSelect Number PS10153639
Manufacturer Part Number 651527-9
This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows:rn • The tool has completely stopped functioning - it will not start. rn • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all.rn • The variable speed function and electric braking aren't working properly.
Your Price
$5.95
Special Order
Makita Sander Hex Head Socket Bolt
PartSelect Number PS10145268
Manufacturer Part Number 265812-0
This is an authentic OEM approved replacement part designed for use with Makita sanders. The purpose of this bolt is to secure the sandpaper disc to the pad. It is made out of metal and it is sold individually. To install or remove this bolt you would need a hex key/allen wrench.
Your Price
$31.95
Special Order
Makita Sander Power Cord (8-foot)
PartSelect Number PS10153856
Manufacturer Part Number 664630-7
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 8 Feet Long
Makita Sander Appliance Types
Popular Makita Sander Models
Below are the most popular Makita Sander models we have. Enter your model number in the search box to find your model.