Ryobi Router Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Ryobi Appliance Parts
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Appliance Type Shop By Part Type

Popular Ryobi Router Parts

Your Price
$5.95
  Special Order
Ryobi Router Carbon Brush Assembly
PartSelect Number PS10080335
Manufacturer Part Number 290069048
This is a genuine manufacturer approved replacement brush. It is specially produced for Ryobi routers. Includes one (1) carbon brush with lead wire, spring and a metal holder attached. Please note, most tools use two brushes. It is recommended to replace both brushes at the same time to ensure top performance. Replacing this carbon brush is a simple task that should only require a screwdriver to complete this job. • First make sure the tool is unplugged • Remove the brush caps • Remove the old brush • Secure the new brush • Reassemble and test your tool
Your Price
$10.95
  Special Order
Ryobi Router Adaptor 1/4 Collet Steel
PartSelect Number PS18698605
Manufacturer Part Number 672036001
This is an genuine OEM sourced replacement part used on routers. This part provides a grip for holding a bit in a tool. It is made out of metal and is sold individually. This collet is for using bits with 1/4" arbors only. Due to prolonged, heavy use a collet adapter may need to be replaced eventually. To replace this item you would need to use a Wrench. • First you would need to remove the collet nut • Once the nut is removed you can remove the old collet adapter • Place a new one in place • Tighten the collet nut back in place and your unit is ready to use 1/4" bits
Your Price
$5.95
  Special Order
Ryobi Router Collet 1/4 Inch
PartSelect Number PS16755887
Manufacturer Part Number 690045003
This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi power tools. The collet allows a user to secure a bit. Note, it is for using bits with 1/4
Your Price
$5.95
  Special Order
Ryobi Router Circular Saw Lock Nut (m5)
PartSelect Number PS10083854
Manufacturer Part Number 670974003
This is a genuine component which is supplied directly from the original equipment manufacturer for Ryobi and Ridgid equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this hardware. Keep in mind this high-quality lock nut is made of durable metal and is sold individually.
Your Price
$5.95
  Special Order
Ryobi Router Carbon Brush W/spring Assembly
PartSelect Number PS10080339
Manufacturer Part Number 290069107
This high quality replacement brush assembly is specially designed for use with Ryobi routers. It is a genuine OEM sourced item, not an aftermarket equivalent. Motor brushes allow electricity to flow to the motor's spinning armature. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. It is advised to replace both brushes at the same time. This assembly includes (1) carbon brush in a metal brush holder with a lead wire and a spring attached. You would need a screwdriver to complete this job. • Unplug the tool • Remove the housing • Remove the old brush • Secure the new one in place • Reassemble and test the tool
Your Price
$5.95
  Special Order
Ryobi Router Subbase-square
PartSelect Number PS16349653
Manufacturer Part Number 519234001
This authentic item is supplied directly from the original equipment manufacturer for use with Ridgid trimrouters. When replacing this part a screwdriver may be needed. Over time the subbase-square may break and will need to be replaced. This item is sold individually and is made out of plastic.
Your Price
$5.95
  Special Order
Ryobi Router Ball Bearing (6001zz)
PartSelect Number PS11855727
Manufacturer Part Number 089040002009
This is a genuine OEM ball bearing. It is compatible with various Ryobi, Ridgid, and MK Diamond power tools including saws and trimmers. Ball bearings prevent damage to rotating parts by reducing friction and securing positioning. They are high wear components and commonly need replacement with regular use. Sold individually.
Your Price
$5.95
  Special Order
Ryobi Router Lever Plunge Lock Gray
PartSelect Number PS11858027
Manufacturer Part Number 550849004
This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with plunge routers. The plastic lever is used to actuate the plunge lock screw to keep the router locked at a set depth. This item is available as an individual replacement part. A small screwdriver is needed to install this item.
Your Price
$7.95
  Special Order
Ryobi Router Assembly Subbase
PartSelect Number PS11856865
Manufacturer Part Number 200234020
Your Price
$7.95
  Special Order
Ryobi Router 15/16 Wrench
PartSelect Number PS10083837
Manufacturer Part Number 670346001
This a genuine manufacturer-sourced replacement part for use with Ryobi Routers. This wrench is an exact replacement for a broken or missing wrench that originally came new with your product. The metal wrench is used to loosen and tighten bolts on the machine and is an individually sold part.

Ryobi Router Appliance Types

Related Ryobi Router Parts

Popular Ryobi Router Models

Below are the most popular Ryobi Router models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More